Welcome To our shop !

Williams AV FM T55C D FM+ C Assistive Listening System with Dante

$100.00 $2,687.00

FM+ C with Dante is the first transmitter of its kind to offer an FM broadcast and Wi-Fi audio broadcast from a single input source. Whether using the FM+ C for assistive listening, language interpretation, or audio description, this dual broadcast technol

Qty:

Payment:

Payment Option Image

FM+ C with Dante is the first transmitter of its kind to offer an FM broadcast and Wi-Fi audio broadcast from a single input source. Whether using the FM+ C for assistive listening, language interpretation, or audio description, this dual broadcast technology gives users the option of listening to real-time audio stream on their smartphone or tablet using the free WaveCAST receiver app (iOSandAndroid) or use an available FM receiver from the venue.

The FM+ Chas support for Telnet commands via an Ethernet port enabling AV professionals to control and monitor the FM+ C using third-party room control systems.

Specifications

Dimensions 8.45 W x 8.25 D x 1.72H (21.5 cm x 21 cm x 4.4 cm)
Weight Transmitter: 3.2 lbs (1.45 kg)
Color Black
Rack Mount Standard 19 Rack, one EIA rack space high, 1/2 space wide
12 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits
Power Supply Desktop Style Transformer (TFP 062); Input: 100-240 VAC, 50/60 Hz. IEC Line Cord; Output: 24 VDC, 750 mA, 18W. 2.5mm ID center positive barrel connector
Power ON Indicator Push On/Push Off latching power button with backlight. Green backlight indicates power ON, backlight off indicates power OFF.
Temperature Range Operating: +32 F to +122 F (0 C to 50 C); Storage: -4 F to +158 F (-20 C to 70 C)
User Interface 1. 3.12 High Resolution OLED display with selections via buttons. 2. Hosted Web page. 3. Telnet commands over ethernet (see our WaveCAST and FM+ Programmers Guide for available commands and protocol).
Dante (1x) RJ-45 jack. Only available on FM T55C D
Ethernet RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address. RJ-45 jack used for web page and streaming audio out. An external Router/DHCP Server is required to stream audio to receiving devices.
RF Section
Operating Frequencies 72.1-75.9 MHz , 17 wideband channels (selectable)
Frequency Accuracy 2 ppm stability, 0-50 C
Deviation 75 kHz maximum
Pre-Emphasis 75 microsec
RFField Strength Does not exceed 80 mV/m at 3 m
Compatible Antennas ANT 005, ANT 021, ANT 024, ANT 025, ANT 028, ANT 029, ANT 034

Refer to Williams AVs Antenna Selection Install Guide for FCC-compliant antennas for this product.

Transmission Range Up to 1000 ft (304 m) with ANT 005 coaxial antenna mounted on rear chassis F-connector
RF Outputs (1x) #10-32 stud connector in center of unit (pcb mounted)
(1x) F-connector on rear chassis
RF Transmit (RF) Power Indicator 1 OLED On Air Indicator with 4 states indicating power level Off, Low, Medium, and Full Power.
RF Time Out (sleep mode) 30 min. duration, 4 hr. duration, or Always On; selected via web page. When audio drops below -18dB, the selected duration begins, and when it expires the unit stops transmitting and goes into a low-power (sleep) mode. Any button press or resumption of audio above -18dB awakens the unit and it begins transmitting again.
Audio Section
Audio Inputs (1x) Combination 3-pin XLR, 1/4 (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power. Optional RJ-45 Dante Input (D models only).
Audio Processor Functions DSP based; Compression: 1:1, 1.5:1 or 2:1; High-pass and Low-pass Filter Frequency control, Music, Voice, and Hearing Assistance Audio Presets
Frequency Response 31-16000 Hz, 3 dB (re: 1 kHz) (Music Audio Preset)
Signal-to-Noise Ratio 64 dB (typical) Transmitted RF @ 1kHz
Total Harmonic Distortion Less than 0.25% @ 1 kHz (RF output)
Common Mode Rejection Greater than 57 dB @ 1 kHz, Mic or Line mode
Audio Input Gain Adjust Adjustable from +24dB to -60 dB, in 1dB steps from front screen or web page
Phantom Power 14.4 VDC applied through 2.2 kOhms resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on 1/4 TRS jack
Audio Level Display Front screen bar graph display, each segment representing 3dB. It ranges from -18 (1 segment lit) to +12dB (10 segments lit). Over-range warning is indicated by OLVD and flashing empty bar.
Headphone Output 1/4 TRS stereo jack, mono signal, 7.8 mW total power with 33 .
Dante Output (1x) RJ-45 jack
Input Level (Bal or Unbal) (at Audio Input Gain = 0dB)
Nominal (@7th Segment Lit) Overload Warning (Displayed on Screen) Absolute Max. Rating*
Microphone
-45 dBV (5.6 mV RMS) -20 dBV (100 mV RMS) +20 dBV (10.0 V RMS)
Line
-8.4 dBV (380 mV RMS) +16 dBV (6.5 V RMS) +20 dBV (10.0 V RMS)
Approvals FCC, RoHS3, WEEE, Industry Canada
Warranty 2-year warranty against component failure and manufacturing defects. See the Full Warranty statement on the website for details.* Stresses above these ratings may cause permanent damage or degrade reliability.

Reviews

There are no reviews yet.

Be the first to review “Williams AV FM T55C D FM+ C Assistive Listening System with Dante”

Your email address will not be published. Required fields are marked *