Harnessing the power of the internal DSP

The supplied editing software gives a practical overview of all system parameters and DSP features within the DP-N amplifier.

It is simple to monitor and edit the DP-N remotely.

REDUNDANCY

DP series amps get used in mission critical environments.Therefore the auto mode has been built in to deliver redundancy capability.

Set the input to Auto and the input will change, should a problem happen with external connections.

(Use of an internal delay is advised to compensate for any switch timing and latency issues)

FIR FILTERS

Independent control of magnitude and phase.

More detailed equalisation.

Optimization of frequency and power response.

STABLE DOWN TO 2 OHMS

Huge output power and stable down to 2 Ohms

The power output figures of DP-N series are staggering.The rated power outputs are measured at THD = 1%, continuous sinusoidal 1 KHz with each channel working simultaneously.

DP-N amps are also stable down to 2 Ohms. This allows for multiple 8 or 16 speakers to be driven with extreme power.

DANTE

Using the Ultimo 44 chipset, DP-N amps easily join any Dante ecosystem.

Digital audio connectivity of up to 96 KHz

Remote, network control.

Audinate is a registered trademark of Audinate Pty Ltd.

Dante is a registered trademark of Audinate Pty Ltd.

• 2 channels
• 8 Ohm 2 x 2000 W
• 4 Ohm 2 x 3400 W
• 2 Ohm 2 x 4760 W
• 16 Ohm Bridged 1 x 4000 W
• 8 Ohm Bridged 1 x 6800 W
• 4 Ohm Bridged 1 x 9520 W
• 100 V Hi-Z 2 x 3400 W
• 70 V Hi-Z 2 x 2400 W