Dimensions

205 x 86 x 50mm (8.07 x 3.38 x 1.97); 971 grams (2.14 lbs.) – weight and dimensions of power supply only, not including cables or packaging.

Input Voltage

The 1 SPOT Pro CS11 can be used anywhere in the world without the use of a step-up or step-down transformer. Like our 1 SPOT, it transforms wall voltage from 100-240Vac, and converts it into the stated voltages on the bottom of the unit.

Cables

The 1 SPOT Pro CS11 includes a generous assortment of cables and converter plugs. The cables are of various lengths, color-coded for easy cable management and with right angle plugs on the pedal end.

Power cables (all are center pin negative polarity):

• (2)DC26(5.5×2.1mm barrel plugs; 26 (660mm) Purple
• (2)DC22(5.5×2.1mm barrel plugs; 22 (559mm) Blue
• (4)DC18(5.5×2.1mm barrel plugs; 18 (457mm) White
• (3)DC12(5.5×2.1mm barrel plugs; 12 (305mm) Yellow
• (1)MC2Two 5.5×2.1mm barrel plugs with 5.5×2.1mm input socket.

Converter Plugs:

• (1)CL6 (5.5×2.1mm barrel input, 5.5×2.5 barrel output; reverse polarity) Green for Line 6 DL4/M9/etc. and some Eventide pedals.
• (1)CYR (5.5×2.1mm barrel input, 5.5×2.1 barrel output; reverse polarity) Red reverse polarity converter
• (1)C35 (5.5×2.1mm barrel input, 3.5mm male output; tip positive) Black 3.5mm (1/8) plug converter
• (1)CBAT (5.5×2.1mm barrel input, Black battery clip output) Connects to battery clip wires inside pedals that do not have DC jacks. Do NOT connect to a battery!
• (1)C2.5 Gray 5.5×2.5mm plug converter- can be used for Line 6 HX series and POD Go

Available Output Voltages

• Outputs 1-2, 10-11: 9VDC (500mA)
• Outputs 3-4: 9VDC or 18VDC (100mA)
• Outputs 5-6: 9VDC or 12VDC (250mA)
• Outputs 7-9: 9VDC (250mA)