The titaniumSD1G SolidDrive Sound Transducer for Glass installationfromSoundTube Entertainmentutilizes dual-voice coil technology in an aluminum enclosure to transfer acoustic energy to any substrate. Symmetrically opposed neodymium magnets and specificall
The titaniumSD1G SolidDrive Sound Transducer for Glass installationfromSoundTube Entertainmentutilizes dual-voice coil technology in an aluminum enclosure to transfer acoustic energy to any substrate. Symmetrically opposed neodymium magnets and specifically engineered mounting hardware results in hidden planar-source acoustics. The result is acoustical uniformity throughout the listening space.
This sound transducer is designed for mounting on glass surfaces, and comes with a double-sided VHB (Very High Bond) adhesive silicone disc and a direct screw aluminum mounting base and an attached wiring harness with EuroStyle connector. This transducer can be installed on windows to deliver sound to glass storefronts and glass reception areas. The entire windowpane can become a speaker delivering both interior and exterior sound on a single-pane glass.
The SD1G Sound Transducer is suitable for use at restaurants, mall stores, auto dealerships, department stores, stadium sky boxes, reception areas, and glass atriums.
Note: To ensure optimal listening experience, the installer must equalize the SolidDrive SD1 System. Equalization is accomplished by using the SolidDrive Glass Passive Equalization Module (sold separately).
Note: This transducer is designed for glass installation only
Specifications
System Type | On-surface full-range transducer |
Impedance | Nominal: 8 ohms |
Sensitivity | dB @ 2.83 V/1 m: 70 to 75 dB dB @ 1 W/1 m: 73.5 dB |
Frequency Response | 70 Hz to 15 kHz @ -3 dB: 80 Hz to 10 kHz @ -10 dB: 60 Hz to 15 kHz |
Maximum Power | Program: 50 W Continuous RMS: 30 W SPL @ 1 m: 88.5 dB |
Recommended Amplifier Power | 10 to 100 W |
Coverage Angle | -6 dB @ 2 kHz: 120 -6 dB @ 10 kHz: 120 |
Enclosure | Chrome-plated aluminum |
Inputs | Wire lead with screw connector block |
Dimensions | 2.28 x 2.08″ (5.79 x 5.28 cm) |
Weight | 1.20 lb (0.54 kg) |
Packaging Info
Package Weight | 1.335 lb |
Box Dimensions (LxWxH) | 6 x 5.9 x 5.1″ |
Reviews
There are no reviews yet.