TheSolid State Logic XL-Deskwith 16 E Series EQ Modulesis a modern twist on the classic analog studio console. It's designed for tracking or mixing engineers who require an analog console within a DAW-centric studio, but don't want or need the integrated D
TheSolid State Logic XL-Deskwith 16 E Series EQ Modulesis a modern twist on the classic analog studio console. It’s designed for tracking or mixing engineers who require an analog console within a DAW-centric studio, but don’t want or need the integrated DAW control and analog level automation other SSL console products have.
XL-Desk is in many ways a traditional 24 into 8 analog console, but it packs in a wide selection of features. It has 20 channel strips: 16 dual input mono (switchable between main input or DAW return) and 4 stereo channels. The first eight channels have VHD mic pre’s. There is an 18-slot 500-series rack built in that can be used for processing or mic pre’s. This version of the console comes loaded with 16 E Series EQ modules. XL-Desk ships with a legendary SSL Stereo Bus Compressor module in slots 17 & 18 (hard-wired to Mix A). The rack has its own dedicated power supply.
There are four main Mix Busses (A, B, C, D) with Busses B, C and D able to be summed into Mix A. The Busses and channels can access the 500 racks, and each has a separate insert point for processing. There are two mono aux sends and two stereo return inputs. Direct outputs on every channel, stereo return and mix bus enable convenient stem printing. Each channel has a Cue Stereo Bus section (with Pan and Level) used to provide one of the headphone mixes while tracking. At mixdown, the mono channel DAW return signals can be routed to the CUE ST bus and then summed into Mix A. As a result, there are 16 main faders, 16 Cue ST inputs, and 4 Stereo channels, providing 40 summing inputs (using the stereo returns and insert sum functions you can squeeze in over 50 summing inputs).
There is also a fully-featured monitoring section with bass management (3 sets of speakers + subwoofer), foldback A and B with individual talk-backs for headphone mixes, and a built-in Listen Mic input + classic compressor circuit, with its own direct output.
Features
Specifications
| Connections | Power Supply: IEC320 3-pin connector, 100 – 240 VAC, 50 – 60 Hz Analog I/O: 25-pin D-type socket, balanced, Zin > 10 kOhms, Zo 100 ohms, 3-pin XLR-M, balanced, Zo 100ohms Headphones: Stereo 1/4″ jack socket, Zo 75ohms iJack: Stereo 3.5 mm jack socket, Zi 10 k USB: 1 x type-B chassis socket (SSL diagnostic use only) |
| Performance | Maximum I/O Level: +18 dBu or 24 dBu
Frequency Response: |
| Electro Magnetic Compatibility | EN55103-1:2009, EN55103-2:2009 Environment: E4 Initial in-rush current: 3.2 A 5 sec in-rush current: 3.2 A Braid-screened cables should be used where applicable Star Quad cables should be used where applicable EMC Performance Criteria |
| Environmental | Temperature Operating: +41 to 86 deg F (+5 to 30 deg C) Non-operating:-3 to 122 F (-20 to 50 deg C) Max. gradient: 59 F (15 deg C/hour) Relative Operating: 20 to 80% Humidity Non-operating: 5 to 90% Max. wet bulb: 84.2 deg F (29 deg C), (non-condensing) Vibration Operating: < 0.2 G (3 - 100 Hz) Non-operating: < 0.4 G (3 - 100 Hz) Shock Operating: < 2 G (10 ms max.) Non-operating: < 10 G (10 ms max.) Altitude Operating: 0 to 3000 m Non-operating (above sea level): 0 to 12000 m |
| Power | < 300 watts |
| Dimensions | (WxHxD) 40 x 9.9 x 32″ (1015 x 251 x 812 mm) |
| Weight | 89.5 lb (40.6 kg) |
Reviews
There are no reviews yet.