Shure ULXD1-H50 VHF Wireless Bodypack Transmitter H50 Frequency

The Shure ULXD1 VHF Wireless Bodypack Transmitter is a lavalier, headworn microphone and instrument transmitter for hands-free wireless microphone and instrument operation (microphones and instrument cables sold separately). The ULXD1 is sold as part of the ULX-D Digital Wireless Microphone System, or may be purchased separately and used with an existing ULXD4 digital wireless receiver.

The compact bodypack transmitter features a rugged metal housing, TA4-M (4-pin male) audio input, comprehensive LCD display and much more. The ULXD1 features pristine, compandor-free digital transmission for uncompromising sound quality, range and detail. Its 256-bit encryption keeps wireless transmissions secure, and its adjustable RF output power delivers maximum range wherever necessary. The ULXD1 operates on either alkaline AA batteries or Li-Ion rechargeable batteries for up to 12 hours.

Features

• AES 256-bit encryption for applications requiring secure data transmission
• Proprietary Shure gain ranging optimizes the system’s dynamic range for any input source, eliminating the need for transmitter gain adjustments
• Shure SB900 Lithium-Ion rechargeable battery provides up to 12 hours of battery life, precision metering with 5-segment battery fuel gauge, and zero memory effect
• External charging contacts for docked charging (with the SBC200 dual docking charger)
• Backlit LCD with easy to navigate menu and controls
• Rugged metal construction
• Detachable 1/4 wave antenna
• Frequency and power lockout

Specifications

• Connector TA4F connector
• Unbalanced
• 1 MOhm
• Impedance 50 Ohms
• Operating Range 300′ (100 m)
• Gain Range 0 to 21 dB (in 3 dB steps)
• Line Max Input Level Pad Off: 8.5 dBV (7.5 Vpp)
• Pad On: 20.5 dBV (30 Vpp)
• EIN Preamplifier Equivalent Input Noise (EIN), System Gain Setting = +20: 120 dBV, A-weighted, typical
• RF Output SMA
• Antenna 1/4 wave
• Bandwidth Occupied Bandwidth: < 200 kHz
• Modulation Shure Proprietary Digital
• Output Power 1 mW, 10 mW, 20 mW
• Frequency Response 20 Hz to 20 kHz (1 dB), flat
• Note: Dependent on microphone type
• Battery Shure SB900 Rechargeable Li-Ion or AA batteries
• Battery Runtime @ 10 mW:
• Shure SB900: > 12 hours
• Alkaline: 11 hours
• Housing Cast aluminum
• Dimensions (HxWxD) 3.4 x 2.6 x 0.9″ (86 x 66 x 23 mm)
• Weight 142 g (5.0 oz), without batteries
• Package Weight 0.95 lb
• Box Dimensions (LxWxH) 12.7 x 4.8 x 3.4″

Shure ULXD4-H50 Digital Wireless Receiver Frequency H50

The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D Digital Wireless Systems.

With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX Digital offers uncompromising wireless tailored for professional sound reinforcement.

Specifications

• Predictive switching diversity
• High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
• Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
• Interference detection and alerts provided on both the receiver and Wireless Workbench 6
• Front panel gain adjustment buttons provide up to 60 dB additional gain
• AES 256-bit encryption-enabled for applications where secure transmission is needed
• Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench 6 integration, and AMX/Crestron control
• Support for frequency coordination with the Axient Spectrum Manager
• Yamaha device ID allows simplified channel patching on CL consoles
• Rugged metal chassis
• Intuitive front panel LCD menu and controls with lockout feature
• Upgraded LCD with adjustable contrast and brightness
• Audio and RF LED meters with peak indicator
• Remoteable wave antennas
• Furnished rack hardware

Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

Shure WA305 1/4″ Instrument to TA4F Cable for Shure Transmitters (3′)

The 3′Shure WA305is a straight 1/4″ instrument cable designed for use with Shure GLX-D, ULX-D, and QLX-D wireless transmitters. Ideal for musicians in live stage applications, the WA305 features a gold-plated 1/4″ jack for connection to a guitar or bass, and a locking TA4F connector to allow easy hookup to your compatible transmitter. The instrument jack’s gold plating reduces corrosion and enhances conductivity while the TA4F’s locking mechanism inhibits accidental disconnects.