The front panel of the DS-RC2ST features two pushbuttons with two associated LEDs. Upon initial power-up, source1is selected. Touching the other button de-selects source1and immediately selects source2. An LED adjacent to each button shows which source is
The front panel of the DS-RC2ST features two pushbuttons with two associated LEDs. Upon initial power-up, source1is selected. Touching the other button de-selects source1and immediately selects source2. An LED adjacent to each button shows which source is selected.
In a typical installation, the DS-RC2ST may be used to select between two audio or video sources, or to route audio to two destinations. To select between two audio sources, the DS-RC2ST is connected to an RDL ST-SSR1 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. For audio routing, an RDL ST-RX2 is used. In each of the above examples, only one output terminal is needed for triggering. Therefore a single shielded pair (or 3-conductor cable) is required for remote connection. For more complex switching networks, both outputs may be used.
Features
Specifications
| Ambient Operating Environment: | -10 C to 55 C |
| Connections: | Detachable terminal block; Power input; open-collector outputs (25 mA current limited) |
| Selectors (2): | Momentary pushbuttons, (1 for each channel) |
| Indicators (2): | Red LEDs, (indicates channel selected) |
| Power Requirement: | GROUND-REFERENCED, 24 Vdc @ 30 mA |
| Mounting: | Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separately |
| Package Type: | Cardboard Box |
| Tariff code: | 8543.70.9860 |
| WEEE weight: | 0.23 lbs. |
| Package Dimensions: | 3.625 x 4.625 x 2.125 in. |
| Shipping Weight: | 0.375 lbs. |
Reviews
There are no reviews yet.