Welcome To our shop !

QSC E115 2Way 500W Passive Loudspeaker – 15″

$100.00 $1,086.99

TheE115is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8 compression driv

Qty:

Payment:

Payment Option Image

TheE115is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8 compression driver attached to the 75 DMTTMwaveguide assures that even distant listeners will be well covered.

E Series loudspeakers will perform very well with any quality, professional power amplifier but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Todays powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSCGXDorPLDamplifiers or with a QSCTouchMixdigital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

Features

  • High output, professional quality sound with E115 500 W continuous power
  • E Series Entertainment System Advanced digital signal processing tunings and options using QSCGXD,PLDamplifiers orTouchMixdigital mixers.
  • E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
    • For PLD/CXD visitAmplifier Navigator Software
    • For GXD visit theGXD Firmware Updater
  • Titanium diaphragm for high fidelity and long life
  • Rugged tour-grade textured paint
  • Foam-lined perforated steel grill
  • Available U-Style Yoke and M8 rigging kit for permanent installation
  • Dual angle pole socket

Specifications:

  • Configuration 1 x 15-inch, 2-way, non-powered
  • Frequency Response (-6 dB) 55 Hz 20 kHz
  • Frequency Range(-10 dB) 43 Hz 20 kHz
  • Power capacity1: continuous/peak 500 W / 2000 W
  • Sensitivity 97 dB, 1 W @ 1 m
  • Coverage Angle 75conical DMT
  • Output2(peak SPL @ 1 m) 130 dB
  • Drivers
    • LF381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil
    • HF38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compressiondriver
  • Nominal Impedance 8
  • Cross-over Full-range only 1.55 kHz
  • Input connectors 2 x NL4, 1 x barrier strip
  • Enclosure Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.
  • Dimensions(WxHxD)16.5 x 28.2 x 17.5 in /420 x 716 x 445 mm
  • Net weight 31 kg / 68 lb
  • Shipping weight 34 kg / 75 lb

Reviews

There are no reviews yet.

Be the first to review “QSC E115 2Way 500W Passive Loudspeaker – 15″”

Your email address will not be published. Required fields are marked *