QSC AcousticDesign ceiling loudspeakers offer a variety ofmodels specificallytailored fordemands of higher fidelity applications. Designed for clarity and presence, these loudspeaker systemsdeliver pristine audio reproduction forinstallations requiring a refined audio experience.

Features

• Consistent tonal characteristics across the entire AcousticDesignfamily in both surface or ceiling applications
• DMT (Directivity Matched Transition) waveguide ensures smooth, uniform frequency response over the coverage area
• Snap-fit magnetic grille
• 3x double stepped, long travel dog-ear blind mount system
• Advanced Intrinsic Correction voicings available via Q-SYS networked audio processing platforms, including CXD amplifiers
• Low-saturation and low-loss 70/100V transformers with 16 bypass
• Blemish-free removable logo
• Removable conduit cover plate, also available as accessory for pre-install wiring
• UL1480 and UL2043 certified EN54-24 Type A (pending)
• Available in white (RAL 9010)
• Complete EASE, CF2, CAD, & BIM information available online

Specifications

• Effective frequency range:68 Hz 20 kHz
• Rated noise power / voltage:30 watts / 22 volts (rms)
• Sensitivity [dB]:87
• Rated coverage (-6 dB):150 conical DMT
• Coverage angle by frequency:500Hz 1000Hz 2000Hz 4000Hz
• Conical coverage:160 160160160
• One-third octave frequency band contribution at full power using 100V maximum tap (Hz / dB)
• 500 / 57.4; 630 / 57.4; 800 / 57.4
• 1000 / 57.4; 1250 / 57.4; 1600 / 57.4
• 2000 / 57.4; 2500 / 57.4; 3150 / 57.4
• 4000 / 57.4
• Directivity factor (Q):4.5
• Directivity index (DI) [dB]:6.5
• Maximum continuous SPL [dB]:102
• Maximum peak SPL [dB]:108
• Nominal impedance [ohms]:16
• Recommended amplifier:60 watts
• Transformer taps / impedance:
• 16 (in bypass setting)
• 3.75W (70V); 7.5W (100V) Tap: 1333
• 7.5W (70V); 15W (100V) Tap: 667
• 15W (70V); 30W (100V) Tap: 333
• 30W (70V); N/A (100V) Tap: 167
• LF transducer:114 mm [4.5 in] weather resistant paper cone woofer
• HF transducer:25 mm [1 in] aluminum dome tweeter
• Input connector type:Euroblock connector with parallel output
• Enclosure material:ABS baffle on powder coated steel back can
• Grille material:Powder coated steel
• Ingress protection:IP-54
• Operating environment:Designed for indoor use
• Operating temperature range:-20 to 50 C [-4 to 122 F]
• Cutout dimension: 245 mm [ 9.65 in]
• Net weight:3 kg [6.6 lb]
• Product dimensions (Diameter x Height): 280 x 100 mm [ 11.02 x 3.93 in.]
• Shipping weight:10.2 kg [22.5 lb] (pair packed)
• Shipping dimensions (H x W x D):183 x 699 x 394mm [7.2 x 27.5 x 15.5 in](pair packed)
• Included accessories:C-ring and tile rails, rail screws, euroblock connector, cut-out template, tether grille
• Optional accessories:AD-MR4 (pre-install mud ring),AD-CC4 (pre-install conduit cover)