TheMoog Subsequent builds upon the success of the original Sub 37 Tribute Edition synthesizer with several enhancements and is well suited for synthesizer enthusiasts, professional musicians, and sound designers. Upgrades include an updated sound engine fo
TheMoog Subsequent builds upon the success of the original Sub 37 Tribute Edition synthesizer with several enhancements and is well suited for synthesizer enthusiasts, professional musicians, and sound designers. Upgrades include an updated sound engine for better sonic dimensionand more than twice the headroom of the original mixeran updated keybed for a lightweight touch and swift action, velocity, aftertouch, and a higher-powered headphone amplifier. The filter’s multidrive circuit has also been expanded for a wider range of dirtier tones.
The original sound engine and design is based on the Sub 37 Tribute Edition, which boasts a paraphonic synth voice and features the ability to play two notes at a time. It puts a full palette of sound-creation tools at your fingertips with its 40 knobs, 74 switches, and dedicated LCD display. The synth engine includes two oscillators and a sub oscillator for sound generation, and two LFOs for modulation. It also has an arpeggiator, step sequencer, glide, classic Moog ladder filter, and two ADSR envelope generators for sound-shaping. There are 256 presets available for saving patches.
Features
Specifications
Instrument
| Sound Engine | 100% analog |
| Polyphony | Selectable monophonic or paraphonic |
| Keybed | 37-note, semi-weighted with after-pressure |
| LCD | 128 X 64-pixel LCD with white backlight |
| Controllers | Pitch Bend, Mod Wheel, After Pressure, Velocity |
| Sound Source | 2 x variable waveshape oscillators 1 x square wave sub oscillator 1 x analog noise generator 1 x external input/filter feedback |
| Oscillator | Oscillator Calibration Range: 22 Hz to 6.8 kHz, (note range at 8′ = 18 to 116) |
| Portamento | Glide Module: Assign to Osc1/Osc2/Both Type: LCR, LCT, EXP, Gated, Legato |
| Filter | 20 Hz to 20 kHz Moog Ladder Filter with 6/12/18/24 dB/oct filter slopes and multidrive |
| Transpose | 2 octaves |
| Arpeggiator | Arpeggiator / Sequencer: Up, Down, Order, Random, Latching, Back/Forth, Invert, +/-2 Range, Tie, Rest, MIDI Sync, 64-note sequencer |
| Inputs and Outputs | Audio Input: 1 x 1/4″ / 6.35 mm TS Audio Output: 1 x 1/4″ / 6.35 mm TS Headphone Output: 1 x 1/4″ / 6.35 mm TRS with separate volume control |
| Presets | 256 Presets: 16 banks x 16 presets |
| MIDI I/O | MIDI In: 5-pin DIN connector MIDI Out: 5-pin DIN connector MIDI over USB: USB Type-B |
| CV Interface | CV/Gate Inputs: Filter CV, Pitch CV, Volume CV, KB Gate (1/4″ / 6.35 mm) CV Destinations: KB Pitch (is also sequence pitch), Velocity, Aftertouch, Mod 1, Mod 1x Ctrl, Mod 2, Mod 2 x Ctrl, Filter EG, Amp EG, Pitch Wheel, Mod Wheel, Seq Mod, Duo Pitch Gate Destinations: KB Gate (is also sequence gate), Ext. Gate, Arp/Seq Clock, Arp/Seq Run/Stop, Arp/Seq Step 1 Trig, Filt EG Trigger, Amp EG Trigger, LFO 1 Rate, LFO 2 Rate |
Modulation
| Source | Sources: LFO (Triangle, Square, Saw, Ramp, Sample & Hold), Filter EG/PGM Programmable Sources: Amp Env, Constant ON, Sine LFO, Noise LFO, Osc 1 Pitch, Osc 2 Pitch, Seq Note, Seq Vel, and Seq Mod |
| Destinations | Destinations: Osc 1 Pitch, Osc 2, Osc 1 & 2 Pitch, Filter, LFO Rate, VCA Level, Osc 1 Wave, Osc 2 Wave, Osc 1 & 2 Wave, Noise Level, EG Time/PGM Programmable Destinations: Filter Resonance, Filter Drive, Filter Slope, Filter Env Amount, Filter Keyboard Amount, Osc 1 Level, Sub Osc Level, Osc 2 Level, External In/Feedback Level, Osc 1 On, Sub Osc On, Osc 2 On, Noise On, External In/Feedback On, Arp Rate, Arp Clock Division, Arp Range, Arp Back/Forth, Arp Ends, Arp Invert, Arp Gate Length, Arp Run, Glide Time, Glide OSC Choice, Glide Type, Glide Gate, Glide Legato, Glide On, LFO 1 Clock Division, LFO 1 Range, LFO 1 Sync, LFO 1 Keyboard Reset, LFO 1 Keyboard Track, Mod 1 Pitch Amount, Mod 1 Filter Amount, Mod 1 Programmable Amount, Mod 1 Programmable Destination, LFO 2 Clock Division, LFO 2 Range, LFO 2 Sync, LFO 2 Keyboard Reset, LFO 2 Keyboard Track, Mod 2 Pitch Amount, Mod 2 Filter Amount, Mod 2 Programmable Amount, Mod 2 Programmable Destination, Osc 1 Oct, Osc 2 Sync, Osc 2 Keyboard Reset, Osc 2 Oct, Osc 2 Keyboard Control, Osc 2 DUO Mode, Osc 2 Freq, Osc 2 Beat Freq, Filter Env Attack, Filter Env Decay, Filter Env Sus, Filter Env Release, Filter Env Delay, Filter Env Hold, Filter Env Vel Amount, Filter Keyboard Track, Filter Env Multitriggering, Filter Env Reset, Filter Env Sync, Filter Env Loop, Filter Env Latch, Amp Env Attack, Amp Env Decay, Amp Env Sus, Amp Env Release, Amp Env Delay, Amp Env Hold, Amp Env Vel Amount, Amp Keyboard Track, Amp Env Multitriggering, Amp Env Reset, Amp Env Sync, Amp Env Loop, Amp Env Latch, Output Volume, Bend Up, and Bend Down |
| LFO | LFO Panel Features: Hi/low range from .01 Hz to 1 kHz, MIDI Sync, KB Reset |
| Envelopes | DAHDSR Envelopes with Multitrigger, Reset, Looping, MIDI Sync, Latch, and Variable control of EG Delay, Hold, Velocity Amount, KB Tracking |
General Specifications
| Power | 110 to 240 VAC, universal power supply with IEC connector |
| Dimensions | 6.8 x 26.8 x 14.8″ / 171.5 x 679.5 x 374.7 mm |
| Weight | 22.0 lb / 10.0 kg |
Packaging Info
| Package Weight | 26.65 lb |
| Box Dimensions (LxWxH) | 30.5 x 17.25 x 9.75″ |
Reviews
There are no reviews yet.