System installers and integrators looking for a flexible 2-channel amplifier will be pleased with theDynacord V600:2, a lightweight 1 RU (1/2 rack) amplifier well suited for background music and announcements in small to midsized commercial installations.
System installers and integrators looking for a flexible 2-channel amplifier will be pleased with theDynacord V600:2, a lightweight 1 RU (1/2 rack) amplifier well suited for background music and announcements in small to midsized commercial installations. With its low energy consumption and flexible power-load allocation, the V600:2 provides easy and trouble-free performance with a reduced cost of ownership.
Notable features include powerTANK, which provides a reservoir of power while the Variable Load Drive (VLD), ensures the powerTANK provides consistent power to either channel with any impedance. The built-in DSP handles input routing and provides HPF, LPF, and peak limiting. The amplifier is equipped with a PFC power supply and protection to ensure reliable and safe operation for years to come. The included rackmount hardware allows you to mount one or two units in a single 1 RU rack. Euroblock connectors and an IEC power cord are also included.
At a Glance
powerTANKpowerTANK is a reservoir of available amplification power that is deployed flexibly across the 2 channels of the amplifier. There is no need to set up the powerTANK as it adapts to the requirements of each zone or output without extra manual configuration of each individual channel.Variable Load DriveVariable Load Drive (VLD) ensures that the powerTANK capacity is utilized efficiently, providing consistent power to any channel with any impedance.dualCOOLThe dualCOOL thermal design means that the amplifier typically operates as a convection cooled amplifier, but in extreme thermal conditions the amplifier is also equipped with an intelligent multi-speed fan to ensure maximum performance and reliability in any application.ecoRAILecoRAIL’s power consumption is similar to a regular standby level, yet ecoRAIL still produces audio output suitable for background music levels, and the Auto Power Down (APD) mode can be engaged to further reduce power consumption to less than 1W when there is no signal present for extended periods.Line InputThe single-cable installation feature is compatible with AES72-1E (RJ45 connectors) wired devices. This solution provides easy installation for both channels without needing to wire all the connections individually.PFC Power SupplyEquipped with a PFC power supply and protection features usually reserved for the professional power amplifiers, means that the amplifier resists complete shutdown situations and will always perform at its best under all conditions.SpecificationsAmplifier
| Number of Channels | 2 |
| Amplifier Power Rating | 4 Ohms / 8 Ohms / 70 V / 100 V: 2x 300 W per Channel 4 Ohms / 70 V: 1x 500 W One Channel Driven (1 kHz) 8 Ohms / 100 V: 600 W One Channel Driven (1 kHz) |
| Amplifier Class | Class-D |
| Load Impedance / Voltage | 4 / 8 Ohms per Channel 70 V (16.7 Ohms) 100 V (33.3 Ohms) |
Performance
| Protections | DC Fault, DC Offset, Output Limiter, Overcurrent, Overvoltage, Power Supply, RF, RMS, Short Circuit, Thermal, Ultrasonic, Undervoltage |
| Frequency Response | 20 Hz to 20 kHz -3 dB |
| Input Impedance | 20 Kilohms (Balanced) |
| Max Gain | 33 dB (at 2 Ohms) 36 dB (at 4 Ohms) 39.2 dB (at 70 V) 42.2 dB (at 100 V) |
| Max Input Level | 18 dBu |
| SNR | > 100 dB (at 4 Ohms) > 102 dB (at 8 Ohms) > 101 dB (at 70 V) > 103 dB |
| THD+N | < 0.1% (1/8th Rated Output Power, 1 kHz) |
| Crosstalk | < -70 dB (4 Ohm) < -75 dB (8 Ohm) < -90 dB (70 V) < -95 dB (100 V) |
Signal Processing
| DSP | Yes |
| Crossover | Yes |
| Limiting | Peak (per Channel) |
Connectivity
| Analog Audio I/O | 1x Block 6-Pin Balanced Line Input 1x Block 5-Pin Control/Remote Input 1x Block 4-Pin Speaker Output |
| Digital I/O | 1x RJ45 Amplink Input (I/O, Network) |
| Network I/O | No |
| Mobile App Compatible | No |
| Wireless | No |
Power
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| AC Power Connector | IEC 15 A / NEMA 5-15 |
| Power Consumption | 115 W (1/8 Power) 12 W (Idle) 1 W (Standby) |
Physical
| Display & Indicators | 2x Green LED (Signal) 2x Yellow LED (Limit) 2x Red LED (Fault) |
| Rackmount Size | 1 U (1/2-Rack) |
| Cooling | 1x Convection 1x Fan (Variable Speed) |
| Operating Conditions | 23 to 113F / -5 to 45C |
| Dimensions | 8.6 x 1.7 x 10.6″ / 21.8 x 4.3 x 26.9cm |
| Weight | 4.6lb / 2.1kg |
Packaging Info
| Package Weight | 7.275 lb |
| Box Dimensions (LxWxH) | 15.3 x 14 x 3.7″ |
Reviews
There are no reviews yet.