Use theBLU-DAN Dante/AES67 to BLU Link Bridge ProcessorfromBSS Audioto add Dante/AES67 connectivity to your BLU Link device. The system incorporates a BLU Link audio bus with 256 audio channels at 48 kHz. The processor enables you to send and receive up to
Use theBLU-DAN Dante/AES67 to BLU Link Bridge ProcessorfromBSS Audioto add Dante/AES67 connectivity to your BLU Link device. The system incorporates a BLU Link audio bus with 256 audio channels at 48 kHz. The processor enables you to send and receive up to 64 x 64 channels of audio simultaneously at 48 kHz to and from other Dante-enabled devices. The unit offers a primary and a secondary RJ45 Dante port for fault tolerance. The Secondary port can be configured for Switched or Redundant operation using Dante 4.0 Controller software. When a device is set for Switched operation, the Secondary Ethernet port will behave as a standard switch port, allowing daisy-chaining through the device.
The unit features two Dante/AES67 RJ45 ports as well as a RS-232 and an additional RJ45 port for control. Additional features include a front panel with LED indicators, HiQnet Audio Architect, and a half-rack design. The BLU-DAN is compatible with separately available Cat 5e / 6 cables up to 328′ and comes with a rackmounting hardware, power cable, and rubber feet.
Features
Specifications
BLU Link Audio Network
| Connectors | 2 x RJ45 Ethernet |
| Maximum Cable Length | 328′ / 100 m on Category 5e Cable Between Devices |
| Latency | 11/Fs (0.23 ms at 48 k, 0.11 ms at 96 k) |
| Pass-Through | Latency: 4/Fs (0.08 ms at 8 k, 0.04 ms at 96k) |
| Number of Maximum Nodes | 60 |
Dante Network
| Connectors | 2 x RJ45 |
| Maximum Cable Length | 328′ / 100 m on Category 5 (100 Mb/s) or Cat 5e/6 (Gigabit) Cable Between Devices |
| Latency | 0.15 to 5.0 ms |
Control Interface
| Connectors | 1 x RJ45 Ethernet 1 x RS-232 |
| Maximum Cable Length | 328′ / 100 m on Cat 5 Cable Between Device and Ethernet Switch |
Power Specifications
| Mains Voltage | 100 to 240 VAC, at 50/60 Hz |
| Power Consumption | 55 VA |
| BTU | Rating: 188 BTU/hr |
General
| Rack Mount | 1 RU |
| Operating Temperature | 32 to 113F / 0 to 45C |
| Dimensions | 13.5 x 8.6 x 1.7″ / 34.3 x 21.9 x 4.5 cm |
| Weight | 5.3 lb / 2.4 kg |
Packaging Info
| Package Weight | 8.75 lb |
| Box Dimensions (LxWxH) | 21 x 11.9 x 5″ |
Reviews
There are no reviews yet.