Designed to bring you up close and personal with the boundaries of audible sound, theBASSBOSS ZV28-MK3is a powered dual 18″ extended-depth subwoofer that delivers ultralow frequencies effortlessly and expands your sound reproduction capabilities. The ZV28-MK3 is a vented, direct radiating subwoofer with a substantial internal volume, tuned to a low frequency. Advanced design features such as anti-standing-wave baffles and pass-through dampers help reduce upper resonances, while oversized ports enhance low-frequency performance at high output.

The ZV28-MK3 is built to run at full throttle. The woofers are kept within safe thermal and excursion limits throughout their operating range regardless of input level. The design guarantees a consistently flat frequency response, with a pair delivering -3 dB to an impressive 21 Hz. This performance is achieved without any need for equalization, and is available on demand at high levels in real-world scenarios. A Neutrik powerCON True 1 power cable is included.

What’s NewMK3 Amp Update

• There are all-new amplifiers in the MK3 series. Total power has increased, however power allocated to woofers increased substantially. The higher output voltages provide more impact. Universal input voltage compatibility of 90-250V provides more flexibility. Waterproof connections provide more peace of mind.

MK3 Enhanced DSP

• The MK3 features all-new 96 kHz DSP. The push-button presets have doubled from 4 to 8, and up to 100 presets can now be stored in the DSP and loaded via LAN. The comprehensive suite of processing includes meticulously tuned equalization, all necessary high-pass and low-pass filters, and multiple protection systems and limiters to prevent driver overload in as many ways as possible.

ControlBASS Software

• ControlBASS software supports an essentially unlimited number of possible BASSBOSS-developed or customized user presets, which integrate seamlessly and coherently with all other BASSBOSS products for effortlessly perfect setups. The latest in DSP programming developments can be added via easy remote updating.

Advanced PowerThe ZV28-MK3 features a 5000W amplifier with an autosensing globally compatible power supply that can run on input voltages anywhere between 90 and 250 Volts. Full output power is available on anything over 110V. The amplifier’s peak output voltage provides for intense, high-SPL hits, while its sustained output is unparalleled in its ability to deliver liquid lows. The amplifier is passively cooled via its external heat sink and by woofer-generated airflow through the port. When necessary, four fans provide additional forced-air cooling capacity during more extreme conditions.
Neutrik powerCON True 1 TOPNew to the MK3 are Neutrik powerCON True 1 TOP (Total Outdoor Protection) waterproof connectors. Waterproof connectors, a totally isolated input connection section, and cones that are waterproofed allow the MK3 series powered loudspeakers to be used outdoors without fear of what the weather will bring (or used indoors without fear of what the partiers wll bring).
Advanced 18″ Drivers

• Dual 18″ woofers with neodymium motors and with massive 4.5″ voice coils
• Neodymium magnets provide higher intensity and efficiency, resulting in a lighter and louder cabinet than those with ferrite drivers

Comprehensive Digital Signal ProcessingThe comprehensive suite of processing includes high-pass and low-pass filters, and multiple protection systems and limiters to prevent driver overload in as many ways as possible, including thermal, excursion, and clipping. The five levels of protection actively prevent the voice coil from overheating, minimize long-term thermal compression, and limit excursion. Because they operate in 5 different modes, the limiters are sophisticated enough to have a largely unnoticeable effect on the transient response and allow the subwoofer to deliver peak output safely.
etherCON Interface

• The new DSP features an Ethernet interface that can be used to control the cabinets from a computer or to load software or firmware updates. Ethernet connectivity in conjunction with the DSP board allow signal to be sent via Milan AVB. Firmware updates provide access to this feature.
• Within the software, multiple cabinets can be grouped together, allowing them to respond to commands simultaneously. This permits levels of multiple loudspeakers to be adjusted together and yet independently from the levels of other groups of loudspeakers. In addition to individual and grouped level controls, presets can be loaded and signal levels and temperatures can be monitored. Each cabinet includes a two-port switch, so multiple cabinets can be chained on the same data cable.
• The MK3 DSP features a storage capacity of up to 100 presets, eight of which can be accessed at the touch of a button with no need for a connected computer. Eight directly accessible presets are compatible with all the presets in the MK3 Top Boxes and are also compatible with previous generation tops and subs.

Specifications

Drivers

Performance

Connectivity

Signal Processing

Power

Physical

Packaging Info