TheNXE1.52 Network Power AmplifierfromAshly Audiois the networkable version of the nX amplifier. It comes with Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional netwo
TheNXE1.52 Network Power AmplifierfromAshly Audiois the networkable version of the nX amplifier. It comes with Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability. All these are controlled using Ashly Audio’s Protea software suite. This amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces, and convention centers.
Features
Note:Hi-Z or Lo-Z, selected via rear panel DIP switches
Note:<1W sleep mode can be defeated for applications that are subject to third-party performance standards that prohibit a sleep mode, including those used for Mass Notification and Emergency Communication Systems and those subject to ANSI/UL 2572.
Note:Front panel LEDs for temperature, current, signal, clip, mute, bridge mode, protect, sleep, and disable (of front panel controls)
Specifications
| Maximum Output Power | Max Output Power Per Channel, EIAJ Test Standard 2 : 1,500 W, 4 : 1,500 W , 8 : 1,250 W Low Z output, Bridge Mode, 20Hz to 20kHz, 1%THD, All Channels Driven 70 V, 100 V Output, All Channels Driven |
| Power Draw | Total Power Draw All Channels Driven
Sleep Mode: <1 W |
| Current Draw | Current Draw 120VAC Mains (divide in half for 240V)
Sleep Mode: 0.1 A |
| Dissipation | Thermal Dissipation BTU/hr, All Channels Driven
Sleep Mode: <3.4 |
| Power Requirements | Power Requirements (@ 50/60Hz)
Nominal (Automatic Sensing SMPS)@ 50 Hz Power Requirements @ 60Hz Nominal (Automatic Sensing SMPS): 240 VAC |
| Power Connector | Power Cable Connector: 20 A powerCON |
| Input Source | Input Source Select Options (Protea DSP): Analog, Auto (Net, AES3, Analog) |
| Limiter | Brick Wall Limiter (Protea DSP)
Threshold: -20 to +20 dBu |
| Compressor | Threshold: -20 to +20 dBu Ratio: 1.2:1 to infinite Attack: 0.2 to 50 ms Release: 5 to 1000 ms/dB Detector: Peak / average Attenuation Bus: 2 available Metering: In, out, attenuation, graphical |
| Control | Autoleveler Controls
Target Level: -40 to +20 dBu |
| Noise | Ambient Noise Compensation: Output Only
Max Gain: -20 to +20 dB |
| Ducking | Ducking: High/Low Priority, Trigger, Filibuster, Ducked Program
Trigger Threshold: -80 to +20 dBu |
| Gate | Threshold: -80 to +20 dBu Range: off, 100 to 0 dB Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB Metering: Key signal, Gate LED, graphical Advanced Gate Controls Key Frequency: 20 Hz to 20 kHz |
| Gain | Gain (with/without VCA): -50 to +12 dB, off, polarity invert Digital VCA Groups: 4 available Remote RD8C Gain: Enable per channel, 0 dB to – WR-5 (neWR-5) Remote Gain: 0 to -50 dB, mute |
| Band | 31-Band
Filter Type: Constant Q or proportional Parametric 2,4,6, or 10 Band Hi/Low Shelf 6/12 dB/oct All Pass |
| Audio Metering | Range: -60 to +20 dBu Increments: 1 dB Signal Level: Off, -50 to +20 dBu Sine Wave Frequency: 20 Hz to 12 kHz |
| Matrix Type | Matrix Mixer
Gain (0.5dB increments): Off, -50 to +12 dB |
| Processor | Input A/D, Output D/A: 24-bit DSP Processors: 32-bit floating point Sample Rates: 48, 96 kHz Propagation Delay @ 48kHz: 1.42 ms Propagation Delay @ 96kHz: 0.71 ms |
Other Specifications
| Cooling | Continuously variable temperature controlled axial fan(s) |
| Environmental | Non Condensing: 32 to 113F ( 0 to 45C) |
| Dimensions | 19.0 x 3.5 x 16.8″ (483.0 x 89.0 x 428.0 mm) |
| Weight | <28 lb (12.7 kg) |
Packaging Info
| Package Weight | 25 lb |
| Box Dimensions (LxWxH) | 19 x 16 x 4″ |
Reviews
There are no reviews yet.