AFlexiverteris an ultra-compact box with a main format, dual power supply and a slot for a switchable AUX board, which adds the conversion format to the FLX unit. At the moment 5 FLX units and 10 AUX boards are available.

Format combinations provide the most common conversions with improved features and unique pairings
(e. g. AES50 <> Dante, Dante <> Dante SRC, Dante <> AVB).

The Flexlink Connection
The FlexLink connection is designed to connect two Flexiverters, or one Flexiverter with the Multiverter. It provides:

– 192×192 channels bi-directional transmission of 24-bit uncompressed audio (fully transparent to AES3 compatible metadata bits)
– Super-low link latency of 4 samples
– Dedicated, high-quality reference clock signal with automatic configuration
– Power supply for connected devices (to reduce cabling), alternatively serves as redundancy scheme when both devices are powered: in case
of power failure, both devices keep working from the remaining power supply.
– Uses standard HDMI cables (with locking screws), to provide easy field replacement in case of defects.

The FlexiverterFLX-AES50is the main format 96 x 96 channel EAS/EBU converter that converts between the built-in AES50 interface and the Aux Card.

Features:

• 3 Possible Flexiverter Applications– Stand Alone, Dual Mode and Multiverter Extension
• Status LEDs For Each Port
• DIP Switches for Advanced Configuration
• USB for Firmware Updates
• AUX Port for Optional Format Module

Specifications:

• Stand Alone(Converts between built-in AES50 interface and the AUX card)
• Channels (all can be used at the same time): 96×96 AES50 @ 48kHz 4848 AES50 @ 96kHz or maximum capacity of the AUX card, whichever is less
• Redundant Power Supply: up to 2x
• Battery-powered Operation (DC 12-15V): Yes
• Sample Rate Conversion: No
• Signal Splitting: Yes (to AUX or FlexLink)
• Channel-wise Routing: No
• Remote Control: No

  Dual Flexiverter(Devices are connected via FlexLink cable)

• Channels (all can be used at the same time): 9696 AES50 @ 48kHz 9696 AES50 @ 96 kHz 96×96 AES3 @ 192 kHz plus what the AUX card provides
• Redundant Power Supply: up to 3x
• Battery-powered Operation (DC 12-15V): Yes
• Sample Rate Conversion: No
• Signal Splitting: Yes (to AUX or FlexLink)
• Channel-wise Routing: No
• Remote Control: No

  Flexiverter + Multiverter(Flexiverter connected to multiverter via FlexLink cable)

• Channels (all can be used at the same time): 448448 from multiverter plus 9696 AES50 plus what the AUX card provides
• Redundant Power Supply: up to 3x
• Battery-Powered Operation (DC 12-15V): Yes
• Sample Rate Conversion: Yes (with SRC-64 card in Multiverter)
• Signal Splitting: Yes, to everything
• Channel-wise Routing: Yes, via MVR-64 (web, telnet or serial terminal)
• Remote Control: Yes, via MVR-64 (web, telnet or serial terminal)

  General

• Dimensions: 152x44x153mm (WxHxD) excluding connectors/buttons, 152x44x169mm (WxHxD) including device-side connectors/buttons
• Weight: 560g
• Power Consumption: +15V DC, 9W max (18W to power two devices via FlexLink)Triple-redundant input (2x DC, 1x via FlexLink)
• Cable Length: FlexLink 1m / 3ft. max. recommended
• Sample Rates: 32 / 44.1 / 48 / 64 / 88.2 / 96 / 128 / 176.4 / 192 kHz
• Channel Count: 9696 @ 48kHz, 3232 @ 96kHz

Item Includes:

• 1xFLX-AES50 Flexiverter Device
• 1xAC Power Cord (country specific)
• 1xUser Manual

Warranty:

• 2 Year Manufacturer’s Warranty