The ultimate music-production centerpiece for any modern commercial, project, or personal studio, theApogee Electronics Symphony Mk II Thunderbolt + Pro Tools HD Plus / Dante Interface with 16x16 SE and 2x6 SE Modulesis designed to deliver high-performance
The ultimate music-production centerpiece for any modern commercial, project, or personal studio, theApogee Electronics Symphony Mk II Thunderbolt + Pro Tools HD Plus / Dante Interface with 16×16 SE and 2×6 SE Modulesis designed to deliver high-performance A/D and D/A conversion at up to 192 kHz for mixing and mastering engineers using a thunderbolt system. The included 16×16 SE and 2×6 SE I/O modules offer stunning dynamic range with low distortion and noise for mastering-grade sonic quality. The system is Dolby Atmos ready.
This configuration gives you a total of 18 analog inputs on two DB-25 connectors and two XLR connectors, plus 22 analog outputs on three DB-25 connectors. You also get two channels of AES I/O on XLR connectors, up to sixteen channels of ADAT I/O via optical connectors, and four channels of S/PDIF I/O via RCA connectors. The chassis utilizes USB-C (Thunderbolt) connectivity for high-speed data transfer rates and compatibility with your computer, DigiLink connectivity to your Pro Tools HD hardware, and Dante connectivity to your Dante network. Its front-panel presents a TFT touchscreen display, multifunction control knob, and convenient 1/4″ stereo headphone output.
Apogee Electronics 16×16 SE Module Analog Input/Output Module for Symphony I/O Mk II
Audio professionals looking for the very best converters will appreciate the updatedApogee Electronics 16×16 SE Module, a sixteen-channel analog input and sixteen-channel analog output module for the Symphony I/O Mk II. The module occupies one of the two slots available on the chassis. Additionally, two-channel coaxial S/PDIF input and output is also provided. The A/D circuit has been refined to offer a streamlined circuit design, resulting in the most transparent signal path to the A/D stage possible.
The D/A section has been optimized with a more powerful and robust output driver that is capable of driving virtually any input without a decrease in performance, regardless of the load presented by the connected gear. The analog inputs and outputs are offered on DB-25 connectors and require optional breakout cables, available in various configurations to suit individual requirements.
Apogee Electronics 2×6 SE Special Edition Mastering I/O Card for Symphony I/O Mk II
TheApogee Electronics 2×6 SEis a special-edition mastering I/O card designed to deliver high-performance A/D and D/A conversion at up to 192 kHz for mixing and mastering engineers in personal, project, and commercial studios. It features low THD+N (-116 dB for analog inputs, -118 dB for analog outputs) and high dynamic range (124 dBA for analog inputs and 131 dBA for analog outputs) for uncompromising accuracy and detail.
Its analog I/O includes two inputs on XLR 3-pin jacks and six outputs on a DB25 connector. Additional XLR, TOSLINK optical, and RCA coaxial jacks provide connectivity for AES/EBU, ADAT, and S/PDIF digital inputs and outputs. The 2×6 SE is easily installed in a Symphony I/O Mk II Thunderbolt or Pro Tools HD chassis.
Features
Specifications
| Converter Type | AD/DA Converter |
| Number of Channels | 16x A/D (at 192 kHz) 16x D/A (at 192 kHz) |
| Display | No |
| Maximum Sampling Rate | 192 kHz / 24-Bit |
| Number of Microphone Inputs | No |
Connectivity
| Analog Audio I/O | 2x DB-25 25-Pin Balanced Line Input 2x DB-25 25-Pin Balanced Line Output |
| Phantom Power | No |
| Digital Audio I/O | 2x RCA Coaxial S/PDIF In & Out |
| Host Connection | No |
| USB (Non-Host) | No |
| Sync I/O | No |
| Network I/O | No |
| MIDI I/O | No |
| Expansion Slots | No |
Performance
| Frequency Response | 1 Hz to 20 kHz 0.05 dB (at 44.1 kHz) |
| Maximum Input Level | +24 dBu |
| Maximum Output Level | +24 dBu |
| Impedance | A/D Converters: 10 Kilohm D/A Converters: 50 Ohm |
| Dynamic Range | A/D Converters: 124 dBA D/A Converters: 128 dBA |
| THD+N | A/D Converters: -116 dB / 0.00015% (at 23 dBu) D/A Converters: -119 dB / 0.00014% (at 21 dBu) |
Digital Audio
| Sample Rates | 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz |
| Bit Depths | 24-Bit |
Compatibility
| OS Compatibility | No |
| Mobile App Compatible | No |
Power
| Power Requirements | PCIe |
Packaging Info
| Package Weight | 2.05 lb |
| Box Dimensions (LxWxH) | 13.2 x 13 x 3.1″ |
Reviews
There are no reviews yet.