Adaptives low-profile channel style beam clamps anchor permanently to structural I-Beams and provide a safe, predictable method for suspending loads from overhead.

The channel style beam clamp is adjustable for beam flange widths ranging from between 16 and 21 (406-533mm). The body of the clamp mounts flush underneath the beams flange and is equipped with a loadrated swiveling shoulder eye bolt thatrotates in the direction of the load to minimize side loading.

Specify this beam clamp for many types of suspensions from horizontally oriented I-Beams, including wire rope assemblies, bridles, rigging chain and
other equipment.

A variety of spacers are included in the kits to accommodate beam flange thickness from .1875 to 1.0 (5mm to 25mm) and the only tools that are needed to install the clamp is a 1.0 and a 7/16

Features

• Single load-rated center suspension
• Provides safe load-rated hang point to 45 off center.
• Secures to beam flanges ranging from 16 – 21

Specifications

• Materials: All Steel Components
• Width: (BC16-21) 16 to 21 / 406mm to 533mm
• Finish: Powder Coat
• Color: Black
• WLL: 790 Lb / 359 Kg WLL (VERTICAL) on Steel I-Beams
• WLL: 45 DEG. WL: 632 lb /287 Kg Steel I-Beams
• WLL: 300 lb / 136 kg max on wooden beams
• Design Factor: 5:1
• DO NOT EXCEED 45 off hang points
• Weight: 10.9 lb / 4.95 kg