TheJBL Control 50 Packis a professional-quality speaker system that includes a set of 4Control 52loudspeakers and aControl 50S/Tsubwoofer.Each speaker has a 2.5" driver with an efficient magnet structure, as well as a rubber half roll surround for enhanced
TheJBL Control 50 Packis a professional-quality speaker system that includes a set of 4Control 52loudspeakers and aControl 50S/Tsubwoofer.
Each speaker has a 2.5″ driver with an efficient magnet structure, as well as a rubber half roll surround for enhanced bass performance. The copper-clad aluminum wire voice coil is on a vented Nomex former to provide high fidelity and reliability, while the copper-capped pole piece provides consistent impedance and extended HF response. The speaker can work with 70/100V distributed lines and low-impedance systems for terrific versatility, and the included wall mounting bracket lets you angle the speaker up to 45 off-axis.
The Control 50S/T subwoofer has a slim, unobtrusive cabinet that contains an 8″ long-excursion driver with a high-mass cone and a 4-layer copper voice coil for extended low-frequency response and high motor strength. The aluminum former provides excellent transient response, while a rubber half roll surround provides enhanced bass performance.
The subwoofer has power handling capability of 150W of continuous power. It has selectable 70/100V output for distributed lines, and also has low-impedance operation. The subwoofer can be paired with 2 or 4 of the satellite speakers, depending on your needs. Mounting brackets are included for attaching the subwoofer to a wall.
Features
Specifications
| Frequency Range (-10dB) | 32 Hz 20 kHz |
| Frequency Response (3 dB) | 50 Hz 17 kHz |
| Power Rating | 200 Watts Continuous Program Power (100 hrs) 100 Watts Continuous Pink Noise (100 hrs) |
| Sensitivity | System: 87 dB with 4 satellites 85 dB with 2 satellites (depends on subwoofer boundary loading, see application note) |
| Impedance | 4 ohms with 4 satellites, 8 ohms with 2 satellites |
| Transformer Taps | 80W, 40W, 20W, (& 10W @ 70V), plus bypass/thru (listed as 8 ohms on switch to indicate subwoofer impedance |
| Maximum SPL (1m) | System: 107 dB with 4 satellites, continuous (113 dB peak) 105 dB with 2 satellites, continuous (111 dB peak) (depends on subwoofer boundary loading, see application note) |
| Input Connectors | Removable locking 2-pin connectors with screw-down terminals. |
| Grille | Zinc-plated steel |
| Mounting Hardware | C50S/T: 2-part flush wall-mount bracket included. C52: Wall swivel ball bracket included |
| Included Accessories | See Control 50S/T & Control 52 |
| Coverage Angle | Omnidirectional |
Reviews
There are no reviews yet.