The P 3115T is a weatherproof full range, wide-dispersion, coaxial two-way loudspeaker system for a variety of professional indoor or outdoor applications. The speaker can be installed individually or coupled in array configurations. The low-frequency transducer is a 15 woofer with a 3 voice coil. The high-frequency section combines a 1.3 RCF Precision compression driver with a 2.5 diaphragm assembly centrally mounted in the throat of the LF driver and loaded on a constant directivity CMD horn for smooth, wide dispersion. The P 3115T features a selectable line transformer for 70 – 100 volt applications, built-in LICC crossover, and Active Mosfet Compression Driver Protection (AMCDP). The single-piece roto-molded cabinet is fully UV protected and meets IP-55 standard requirements, equipped with M10 brass inserts (12x), and a durable and corrosion-resistant 316P stainless steel U-Bracket with spacers (2x) for 90 mounting. The aluminum grille cover is powder coated with water-repellent backing material and has a rotatable logo plate.

All-weather performanceThe single-piece rotomolded cabinet is fully UV protected, equipped with multiple brass inserts and a corrosion-resistant 316P stainless steel U-bracket. Connections to the amplifier are made through a watertight multi-pole connector. The front aluminum grille is powder coated with water-repellent backing material, front logo is rotatable. All P series speakers meet IP55 standard requirements (International Protection Rating), suitable for indoor and outdoor applications.
Versatility for any applicationFocusing on outdoor and indoor large spaces, P Series speakers are capable of true, concert-level high performance in a compact enclosure, installed individually or coupled in array configurations. Featuring coaxial, line source, and subwoofers speakers, all modules embed RCF Precision Transducers, horns, and waveguides for optimal coverage and clarity. The cabinets design with coaxial or coplanar woofers and horns produces identical left and right coverage, capable of delivering serious sonic horsepower within the stadium while maintaining intelligibility and even coverage at every seat.
LICC – Low Impedance Compensated CrossoverThe system includes a high-level crossover network that features lower than conventional induction values. Its benefits are delay reduction, reduced phase shift and superior transient response for improved audio performance and stability.
CMD – Coverage Matching DesignRCF exclusive CMD technology helps guarantee an optimal transition between the high frequency horn polar pattern and the low frequency woofer directivity. The horn can be rotated, allowing to install the loudspeaker either vertically or horizontally.
Customization without boundariesOur Engineering Support Group works side by side with the R&D Department to create tailor-made equipment based on the clients real needs complete with rigging accessories, signal processing, or custom mechanics. We are not only suppliers of standard products but also a team of highly skilled engineers who develop personalized audio solutions. Contact the RCF team to learn more about customization and color options to suit your unique environment. Each project has important benchmarks and we will help you to get the job done.
Features

• 300 W RMS power handling
• 129 dB max SPL
• 75 Hz 20000 Hz frequency range
• 15″ neodymium woofer, 2.5″ v.c.
• 1.75″ v.c. neodymium compression driver
• 90 x 60 constant directivity
• Weatherproof IP55 cabinet with UV protection
• Aluminum grille
• AISI 316L stainless steel bracket
• Built in 100V line transformer

Specifications

ACOUSTICAL SPECIFICATIONS

• Frequency Response (-10dB): 75 Hz 20000 Hz
• Max SPL @ 1m: 129 dB
• Horizontal coverage angle: 90
• Vertical coverage angle: 60
• Directivity index Q: 13
• System Sensitivity: 98 dB

POWER SECTION

• Amplification: Full Range
• Nominal Impedance: 16 ohm
• Power Handling: 300 W
• Peak Power Handling: 1200 W PEAK
• Protections: Dynamic active mosfet
• Crossover Frequencies: 1300 Hz

TRANSDUCERS

• Compression Driver: 1.0”, 1.5” v.c
• Woofer: Coaxial 15”, 2.5” v.c

INPUT/OUTPUT SECTION

• Input connectors: Neoprene Cable
• Constant Voltage Transformer: 100 V
• Power selection 1: 120 W – 83 ohm
• Power selection 2: 60 W – 167 ohm
• Power selection 3: 30 W – 333 ohm

STANDARD COMPLIANCE

• IP protection grade: IP 55
• Safety agency: CE compliant

PHYSICAL SPECIFICATIONS

• Hardware: 12 x M10 inserts + U-brackets and pair of spacers
• Color: Grey, White – RAL 9003

SIZE

• Height: 463 mm / 18.23 inches
• Width: 463 mm / 18.23 inches
• Depth: 433 mm / 17.05 inches
• Weight: 18.4 kg / 40.57 lbs