Welcome To our shop !

Clear-Com BS410 2.4GHz Base Station

$100.00 $8,056.99

The BS410 is the base station for the DX410 wireless system, used with wireless BP410 beltpacks. A single DX410 base station supports up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. Two-wire auto-nulling enables fast and accu

Qty:

Payment:

Payment Option Image

The BS410 is the base station for the DX410 wireless system, used with wireless BP410 beltpacks. A single DX410 base station supports up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. Two-wire auto-nulling enables fast and accurate integration with Clear-Com and RTS wired partyline systems.

Features

  • 2-channels of communications
  • 2.4GHz license-free operation
  • Supports up to 15 beltpacks in a single system
  • 7kHz wideband audio
  • 2-wire and 4-wire bridging on the same system
  • 2-wire auto-nulling
  • Lost packet concealment
  • Simple to set up and configure

Specifications

  • Power Requirements: 100 240V AC, 50 60Hz or 12 14V DC
  • Environmental: Temperature: +32 – +122F (0 – +50C)
  • Dimensions: 1.75 x 19.0 x 17.13in (HxWxD) (44 x 483 x 435mm)
  • Weight:9lbs (4.1kg)

Audio

  • Channels: 2 audio channels
  • Capacity: Up to 15 BP410 and/or WH410 per base station
  • Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex. Radio Frequency Range: 2400 2483.5 MHz
  • Audio Frequency: 200 Hz 7kHz
  • 4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
  • 2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200 , level adjustable, null adjustable to 50dB attenuation, typical
  • Aux Input: XLR-3F with (6.35mm) combo jack, 600 balanced, level adjustable
  • Aux Output: XLR-3M, 600 balanced, level adjustable
  • Headset Connector: 4-pin mini-DIN, Electret microphone
  • Headset Output: 200mW into 32
  • Antenna Type: External -wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
  • System Distortion: <2%
  • Communication Security: dual-slot diversity

Transmitter

  • Type: Frequency Hopping, Spread Spectrum (FHSS)
  • Transmit Power: 100mW burst
  • Modulation Type: Gaussian filtered FSK, TDMA
  • Frequency Stability: 13 ppm
  • Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature

Receiver

  • Type: Frequency Hopping, Spread Spectrum (FHSS)
  • RF Sensitivity: <-90dBm w 10-3 BER
  • Frequency Stability: 13 ppm
  • Distortion: <2%

Reviews

There are no reviews yet.

Be the first to review “Clear-Com BS410 2.4GHz Base Station”

Your email address will not be published. Required fields are marked *