Welcome To our shop !

PreSonus CDL10P Two-Way 1000W Powered Loudspeaker – 10″ (Single)

$100.00 $936.99

Achieve remarkably clear sound without breaking your back with the lightweightPreSonus CDL10P, a compact, constant directivity loudspeaker well suited for fixed installations and mobile sound reinforcement for live bands, DJs, clubs, event halls, bars, spe

Qty:

Payment:

Payment Option Image

Achieve remarkably clear sound without breaking your back with the lightweightPreSonus CDL10P, a compact, constant directivity loudspeaker well suited for fixed installations and mobile sound reinforcement for live bands, DJs, clubs, event halls, bars, speaking engagements, and more. By combining the best attributes of point source and line array technologies, the CDL10P offers consistent, coherent sound with focused pattern control and consistent SPL throughout the frequency response range.

The polypropylene enclosure houses a 1000W Class-D amplifier that powers the single 10″ woofer and six 2″ hi-mid frequency drivers, which combine for a full frequency sound with plenty of volume to reach the back of the room. Rigging CDL10P enclosures is made easier, thanks to the integrated pin-loaded rigging hardware. A dual-angle pole mount provides support for up to two enclosures, while up to six enclosures can be flown offering a truly symmetric 120 x 90 design. You can also fly up to six enclosures with one or two of the optional CDL Sub18 subwoofers for extended low-frequency response. The PreSonus CDL10P ships with a powerCON power cord.

Features

  • Continuous-directivity constant curve array with six 2″ cone drivers disperses sound 120 horizontally
  • 15 vertical directivity can be extended from 30 to 90 with additional arrayable CDL10Ps
  • 10″ long-throw LF transducer with 2.5-inch voice coil
  • Low 420 Hz crossover point minimizes comb filtering and enhances line array intelligibility
  • 1000W Class-D power for high SPLs and lightning-fast transient response
  • Onboard DSP: 90 Hz high-pass filter, Array Mode (1-6 boxes), Sub Mode (Off, CLD18s, ULT18, or AIR18s)
  • 1.4″ (35mm) pole socket with 7.5 downward tilt use with up to two CDL10P on a tripod or atop PreSonus CDL Sub18 subwoofer
  • Integrated flyware to create an array of up to six CDL10Ps
  • Signal, -3 dB, Limiter Protection, and Clip Monitoring LEDs
  • Rugged, lightweight plastic enclosure and tour-grade 1.2mm steel grillegreat for touring bands and mobile DJs

Specifications

Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker/Line Array
Total Power Capacity 1000 W Peak
500 W Program
250 W RMS
HF Driver 6 x2″ / 50.8mm Tweeter
MF Driver No
LF Driver 1 x10″ / 25.4cm Woofer
Wireless Connectivity No
Enclosure Type Bass-Reflex Loudspeaker/Line Array
Total Power Capacity 1000 W Peak
500 W Program
250 W RMS
Amplifier Class Class-D

Drivers

HF Driver 6 x2″ / 50.8mm Tweeter
MF Driver No
LF Driver 1 x10″ / 25.4cm Woofer
LF Voice Coil 2.5″ / 63.5mm

Performance

Coverage Angle 120 H x 15 V
Total Harmonic Distortion < 0%
Protections DC Fault, Overcurrent, Overvoltage, Thermal, Undervoltage

Connectivity

Audio I/O 1 xXLR 3-Pin Line Input
1 xXLR 3-Pin Output
Network I/O No
USB No
Wireless Connectivity No
Bluetooth No
Mobile App Compatible No
*As of October, 2023: Check with manufacturer for the most up-to-date compatibility

Signal Processing

Crossover 420 Hz
EQ No
Parametric EQ No
Semi-Parametric EQ No
Filters No
Dynamic Processing Compression, HF Limiter, Limiter
Alignment Delay No
Phase Adjustment No
Maximum Sampling Rate 48 kHz / 24-Bit

Power

AC Input Power 90 to 260 VAC, 50 / 60 Hz
AC Power I/O 1 xpowerCON Input
1 xpowerCON Output

Physical

Mounting 1 x1.4″ / 35mm Pole Socket (Dual Angle)
Integrated Rigging
Cooling Convection
Construction Material Metal Grille, Polypropylene

Reviews

There are no reviews yet.

Be the first to review “PreSonus CDL10P Two-Way 1000W Powered Loudspeaker – 10″ (Single)”

Your email address will not be published. Required fields are marked *