Our HD and UHD Multicast distribution platforms allow distribution of HDMI video over a 1Gb managed network. The ACM200 Advanced Control Module allows for advanced third party control of our IP50HD, or, IP200UHD / IP250UHD Multicast systems using TCP/IP, RS-232 and IR.

The ACM200 includes a web interface module for control and configuration of the Multicast system and features ‘drag and drop’ source selection with video preview and independent routing of IR, RS-232, USB/KVM, audio and video.

Pre-built Blustream product drivers simplify Multicast product installation and negate the need for an understanding of complex network infrastructures.

Features

• Web interface module for configuration and control of IP50HD, or, IP200UHD / IP250UHD Blustream Multicast systems
• Intuitive ‘drag & drop’ source selection with video preview feature for active monitoring of system status
• Advanced signal management for independent routing of IR, RS-232, USB / KVM, audio and video
• Auto system configuration
• RS-232 integration for control of Multicast system
• IR integration for control of Multicast system
• Video wall control functionality for up to a maximum of 9 x 9 array
• PoE (Power over Ethernet) to power Blustream product from a PoE switch
• Local 12V/2A power supply (optional) should Ethernet switch not support PoE (PSU not supplied)
• Support for iOS and Android App control
• 3rd Party drivers available for all major home control brands

2 x RJ45 LAN connections to bridge existing network to Multicast video distribution network, resulting in

• Better system performance as network traffic is separated
• No advanced network setup required
• Independent IP address per LAN connection
• Allows simplified TCP/IP control of Multicast system

Please note: Compatible with IP50HD, or, IP200UHD / IP250UHD systems only. Please note that for IP50HD systems, a separate ACM200 firmware is required. IP50HD, IP2xxUHD, IP3xxUHD, and IP500UHD systems are not interoperable.

Specifications

• Ethernet Port: 2 x LAN RJ45 connector (1 x PoE support)
• RS-232 Serial Port: 1 x DB-9 female
• RS-232 & I/O Port: 1 x 6-Pin Phoenix connector
• IR Input Ports: 1 x 3.5mm stereo jack
• PoE draw: 4.0W (typical), 4.5W (max load)
• Dimensions (W x D x H ): 96mm x 110mm x 26mm
• Shipping Weight: 0.6kg
• Operating Temperature: 32F to 104F (0C to 40C)
• Storage Temperature: -4F to 140F (-20C to 60C)

Box Contents

• 1 x ACM200
• 1 x IR Control Cable 3.5mm to 3.5mm Cable
• 1 x 6-pin Phoenix Connector
• 1 x Mounting Kit