Welcome To our shop !

Crown CT875 8 Channel 75W @ 4 Power Amplifier

$98.00 $1,975.00

Powering this remarkable amplifieris the pioneering technology ofDriveCore, which integrates theamplifier drive stage into the poweroutput stage fusing everything into achip the size of a dime. DriveCore'sfront-end drive circuits leveragethe inherent effic

Qty:

Payment:

Payment Option Image

Powering this remarkable amplifieris the pioneering technology ofDriveCore, which integrates theamplifier drive stage into the poweroutput stage fusing everything into achip the size of a dime. DriveCore’sfront-end drive circuits leveragethe inherent efficiency of Class Doutput stages while also maintainingsuperb sonic characteristics. Theend result is an audio amplifiercircuit that exhibits the exemplaryaudio quality of a highly evolvedClass AB design.

Features

  • Flexible Input Routing
  • Convection Cooled
  • Universal Power Supply
  • Integrated Life-Safety Features
  • Up to 8X125W in 1U chassis with no fan
  • DriveCore technology provides >90% efficiency with no compromise in performance
  • Patented Feedback and Protection Circuits
  • Amplifier is stable for 2 16 Ohm Loads
  • XFMR 4/8 needed for 70V/100V Applications

Specifications

Channels 8
Sensitivity 1.4 V
Rated Power Output (all channels driven) 75W per CH @ 4 ohms, 75W per CH @ 8 ohms
Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) 110 dB
THD (full rated power, 20 Hz – 20 kHz) < 0.05%
Intermodulation Distortion (from 0 dB down to -30 dB) < 0.05%
Frequency Response (at 1W, 4/8 ohms) +/- 0.5 dB
Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB
Common Mode Rejection (20 Hz to 1 kHz) > 55 dB, typically > 70 dB
Voltage Gain 25 dB
DC Offset +/- 20mV
Idle Power Consumption (Standard Mode) 23.0W
Dimensions 1.75″ x 19″ x 15.19″
Weight 10lbs/4.54kg
Shipping Weight 15 lbs/6.8 kg
IEC Power Connector 15A

Reviews

There are no reviews yet.

Be the first to review “Crown CT875 8 Channel 75W @ 4 Power Amplifier”

Your email address will not be published. Required fields are marked *