GigaCore 30icomes fully optimizedout of the box to be used with the most advancedAV protocols.Preconfigured Quality of Service(QoS),IGMPmulticast, andPTPv2settings will assure a responsive and extremely stable network environment for the most demanding time-critical audio protocols like Dante, AES67, Q-SYS, and many more.

With up to 1000W of total PoE budget andPoE++on every copper port, this GigaCore switch can drive almost any IP PTZ camera or active loudspeaker on the market today.

GigaCore 30iis the ideal solution for AV networks in fixedinstallations,integrationandtouringfor lighting, audio, and video.

Features

• Most suitable applications: Fixed installations
• PoE: PoE ++ Optional (up to 1000W)
• RLinkX (Link redundancy): Yes
• Groups (VLAN segmentation): Yes
• MultiLinkX (Link aggregation): Yes (supported in a future firmware
• Profile manager: Yes
• Memory: Flash 1Gb RAM 8Mb NOR flash 4Gb EMMC storage
• MAC address table: 16384 entries
• Address learning / Aging: Self learning, Auto aging
• Switching throughput: 60Gbps
• Jumbo frames: MTU up to 12000
• IGMP support: Yes (V1/V2/V3)
• IGMP snooping: Yes, enabled by default
• Port sensing: Auto negotiation
• Auto crossover: MDI / MDIX
• Auto sensing: Full or Half Duplex (Gigabit is Full Duplex)

1Gb Connectivity

A range of1Gbversions is available as well with identical PoE and redundancy features. For more information, please see specifications and product codes below.

PoE++

PoE++implementation on every copper port allows you to connect any PoE device available today.

Todays PoE standards (802.3af,802.3atand802.3bt) are all met.GigaCore 30i can directly drive almost any IPPTZ camera, networknodeorPoE powered loudspeakeron the market.

AV validated for real applications

GigaCore switches are fully validated inreal-world applicationswith major brands in theAV industryfor different protocols, includingNDI,Dante,AVB/MILAN,AES67,ST-2110,IPMX,MA-Net, and many more.

We dont just approve against a protocol but actually test it. Because of real world application validation andinteroperabilitytesting, we understand the applications and make sure you can deploy our product withconfidence.

Luminexsupportteam reallyspeaks your languageand has a vast amount ofAV knowledgebuilt up, not just from talking protocols but mainly from working with you and living through yourreal application network challenges.

Robust yet silent design

Arobustyetsilentdesign allows you touseGigaCorein any AV environment.

Fans arespeed controlledto haveminimal noiseimpact and guarantee along-life operation. This allows you to place the GigaCore in themost quiet environmentslike theaters and studios.

Araneo to manage and monitor the complete system

All GigaCore switches can be managed with a singlenetwork-widetool: Araneo

Araneosonlinemode shows everything you need to know about thestatusof your GigaCore network. Data streams and topology arevisualizedas are the port status of every GigaCore.

Monitor your network with confidence andact beforethe show gets interrupted!

Inofflinemode, Araneo lets youplanthe complete network topology and GigaCore settingsin advance. Reducing networkcommissioningtimeto a mere click of a button.

Intuitive web UI

Thebuilt-in web UIallows you to adjust the settings in an intuitive way. AssigningGroups(VLANS) to ports, creatingtrunksor adjusting other port- and PoE settings can be done on the fly and the status page gives you anoverviewof the complete switch at a glance. The toolbox page allows management of profiles and lets you upgrade firmware easily.

Consistency in LED colours

Consistent Group (VLAN) colours in the web UI, in Araneo and on the front panel LEDs.

Specifications

• Connectivity
  • Ethernet connectivity: 24 x RJ45 connectors (1Gbps))
  • Fiber connectivity: 6 x SFP+ cages (1Gbps) (independent from other ports)
  • Ethernet port speed: 1Gbps
  • Serial: 1 x USB C
• Power
  • Power connectivity: 1 x IEC (C14) inlet for each PSU
  • Power input: 100-240VAC, 50-60Hz
  • Power consumption: Maximum 50W – Maximum 1050W (Depending on PoE and PSU configuration)
  • Fuse: NA
  • Backup power input: 100-240VAC, 50-60Hz (through second hot swappable PSU)
  • Backup PoE power input: 100-240VAC, 50-60Hz (through second hot swappable PSU)
  • PoE: PoE ++ Optional (up to 1000W)
• Protocols
  • Supported protocols: Dante, RAVENNA/AES67, Ethersound, Q-SYS/Q-LAN, sACN, ArtNet, MANet2, HogNet, RTTrPL (BlackTraX), IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), PoE (802.3af) (optional), PoE+ (optional), PoE++ (802.3bt) (optional), IEEE 1588 PTP V2, AVB/MILAN
  • Sound protocol compliance: Yes (low jitter)
  • Ethernet compliance: IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet, IEEE 802.3af PoE(optional), IEEE 802.3at PoE+(optional), IEEE 802.3bt PoE++ 90W(optional), IEEE 802.1p CoS, IEEE 802.1d Spanning Tree, IEEE 802.1w Rapid Spanning Tree, EEE 802.1s Multiple Spanning Tree, IEEE 802.1Q VLAN, IEEE 802.1ab LLDP, IEEE 1588-2008 PtPv2, IEEE 802.1 BA-2011 AVB, IEEE 802.1as (gPTP)
• Configuration
  • Display and jog: NA
  • Configuration: Through the built-in web server, Network wide configuration through Araneo software
  • Status LEDs:
    • Global status LEDs: Device, power, PoE power and mode
    • Port status LEDs: PoE, groups, link/activity and port speed
    • Dark mode available
  • Colored RGB LEDs: Yes
• Physical
  • Mounting-Rack
  • Enclosure-Robust metal housing
  • Dimensions (W x D x H)-482 x 309 x 44 mm (19″ x 12.2″ x 1.73″)
  • Weight-5.2 kg (with 2x 100W PSU’s inserted)
  • Environment
    • Operating temperature: 0 to +50 C
    • Storage temperature: -10 to +70 C
    • Humidity (non condensing): 5 to 95% RH
  • Noise level @1m:
    • Max 21,8dBA (Ambient: 0 30C)
    • Max 37dBA (Ambient: 30 50C)
    • Max 32,5dBA (PoE <550W, Ambient: 0 30C)
    • Max 58dBA (PoE <550W, Ambient: 30 50C)
    • Max 36dBA (PoE >550W, Ambient: 0 30C)
    • Max 68dBA (PoE >550W, Ambient: 30 50C)
  • BTU
    • 30i with 1x 100W PSU: Maximum BTU = 101.6 BTU/hr
    • 30i with 2x 100W PSU: Maximum BTU = 111.5 BTU/hr
    • 30i with 1x 550W PSU: Maximum BTU (Max PoE all ports) = 170.6 BTU/hr
    • 30i with 2x 550W PSU: Maximum BTU(Max PoE all ports) = 272.96 BTU/hr
  • Certificates/Approvals: cSGSus Mark (UL), CE Mark, UKCA Mark, CB certificate, RoHS
  • Standards: IEC 62368-1, UL 62368-1, CAN/CSA C22.2 No. 62368-1, EN 62368-1, FCC Part 15 CFR 47, CAN/ICES-003, EN 55032, EN 55024