GREAT CONDITION, DOES NOT COME WITH ANYTHING. THERE ARE A FEW SCRATCHES ON THE PRODUCT. SEE PICTURES.

The MCTRL4K is an LED display controller with ultra-large loading capacity developed by NovaStar. A single unit features a loading capacity of up to 40962160@60Hz.

It supports any custom resolutions with the maximum width or height up to 7680 pixels, meeting the on-site configuration requirements of ultra-long or ultra-wide LED displays.

Features

• 1 DP 1.2 input and 1 HDMI 2.0 input, resolutions up to 8.8 million pixels per input
• 2 D-DVI inputs, total resolutions up to 8.3 million pixels.
• 16 Neutrik Gigabit Ethernet ports and 4 10G optical ports for output.
• Supported video bit depths: 8-bit, 10-bit and 12-bit.
• Supports both mosaic and multi-card working modes for dual-link DVI inputs.
• Supports HDR function, both in HDR10 and HLG standards.
• Supports individual Gamma adjustment for RGB when the bit depth of input source is 10-bit or 12-bit.
• Supports 3D function when working with the 3D emitter EMT200 and 3D glasses.
• Low latency: Less than 1 ms (when the start position of image is 0.)
• Supports ultra-high resolution settings with NVIDIA graphics card.
• Adaptive to inputs with decimal frame frequencies, including 23.98 / 29.97 / 47.95 / 59.94 / 71.93 / 119.88 Hz
• Supports the new generation of pixel level calibration technology of NovaStar.
• Supports screen configuration via Web interface.
• Multiple MCTRL4K units can be cascaded together for uniform control.
• Supports a variety of video formats.

Specifications

Input Compatibility

• HDMI 2.0: 8 bit: 40962160@60Hz (via NVIDIA graphics card) / 10 bit: 38401080@60Hz / 12 bit: 40962160@60Hz (via NVIDIA graphics card)
• DP 1.2: 8 bit: 40962160@60Hz (via NVIDIA graphics card) / 10 bit: 38401080@60Hz / 12 bit: 40962160@60Hz (via NVIDIA graphics card)
• Dual-link DVI: 8 bit: 38401080@60Hz

Processing Features

• HDR: Supports 10-bit HDMI input sources only. The loading capacity of each Ethernet port is reduced by half. Supports A8s and A10s Plus receiving cards only.
• 3D: When the input source is DVI, DVI1 loads the images for left eye, and DVI2 loads the images for right eye. When the advanced screen configuration is enabled, 3D function is not supported. The loading capacity of each Ethernet port is reduced by half
• Low Latency: Supports HDMI and DP input sources only. Each Ethernet port must load panels vertically.
• Calibration: 10bit/12bit, HDR, 3D, image settings
• Genlock: Low latency

Electrical

• Input Voltage: 100-240VAC, 50/60 Hz
• Rated Power Consumption: 30W

Environmental

• Operating Temperature: -20C 60C
• Operating Humidity: 10-90% RH, non condensing
• Storage Temperature: -20C 70C

Physical

• Dimensions: 482.6 x 370 x 96 mm
• Weight: 4.6 kg