The CMS 603ICT LS is a wide bandwidth 240-Watt high sensitivity loudspeaker that utilises our third generation Ceiling Monitor System technology (CMS 3.0), and is UL certified for use with non-DC supervised systems. Thanks to an all-new proprietary 6" ICT
The CMS 603ICT LS is a wide bandwidth 240-Watt high sensitivity loudspeaker that utilises our third generation Ceiling Monitor System technology (CMS 3.0), and is UL certified for use with non-DC supervised systems. Thanks to an all-new proprietary 6″ ICT (Inductive Coupling Technology) point source driver with extended frequency range, the CMS 603ICT LS delivers consistent broadband directivity with enhanced intelligibility. ICT drivers provide exceptional long-term reliability and are ideal for constant-usage applications.
Optimised for Installation
Specifically designed with a self-aligning 4 way clamp system for fast, simple and cost effective installation, CMS 603ICT LS features an acoustically enhanced zinc plated steel back can with removable locking screw terminal connector and loop-thru functionality. A low-insertion loss 60 W transformer with convenient front panel tap switching, paintable powder coated steel mesh grille with dust protection, two tile support rails and one C-ring are all included. An Arco style grille, which conceals the entire unit for aesthetic purposes, and plaster (mud) ring are available separately.
LAB GRUPPEN Ready
The CMS 603ICT LS is finished in semi matt white and optimised for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.
Specifications
Performance
| Frequency response (-3 dB) (1) |
78 Hz – 22 kHz |
| Frequency range (-10 dB) (1) |
51 Hz – 24 kHz |
| System sensitivity (1 W @ 1 m) (2) |
91 dB (1 W = 4 V for 16 Ohms) |
| Nominal Coverage Angle |
90 degrees conical |
| Coverage Angle (1 kHz to 6 kHz) |
92 degrees |
| Directivity Factor (Q) |
7.1 averaged 1 kHz to 6 kHz |
| Directivity Index (DI) |
7.9 averaged 1 kHz to 6 kHz |
| Power Handling (3) | |
| Recommended Amplifier Power |
120 W @ 16 Ohms |
| Nominal Impedance (Lo, Z) |
16 Ohms |
| Rated maximum SPL | |
| Transformer Taps (via front rotary switch) | |
| Crossover |
7 kHz inductively coupled |
Transducers
| Low Frequency |
165 mm (6.50″) mineral loaded polypropylene |
| High Frequency |
ICT aluminium dome |
Physical
| Enclosure | |
| Safety Features |
Safety ring located at rear of enclosure for load bearing safety bond |
| CMS 603ICT LS |
UL 1480 UUMW certification for Life Safety applications |
| Clamping Design |
Security toggle clamp Min / Max clamping range 9.5 mm (0.37″) / 60 mm (2.36″) |
| Backcan Options |
Complete with fixed backcan |
| Cable Entry Options |
Cable clamp & squeeze connector for conduit up to 22 mm |
| Conduit Knockouts on PI Backcan |
3 Sets of horizontal positions 19 / 22 / 28 mm (0.75″ / 0.87″ / 1.10″) |
| Connectors |
Removable locking connector with screw terminals with loop through facility |
| Compliance |
UL-1480, UL-2043, CE |
| Dimensions | |
| Hole cutout diameter (all models) |
253 mm (9.96″) |
| Net Weight (ea) |
5.4 kg (11.9 lbs) |
| Included Accessories |
C-Ring, tile-bridge kit, paint mask, cut-out template, grille |
| Optional Accessories |
Plaster (mud) ring, Arco grille |
| Packed Quantity |
2 |
Reviews
There are no reviews yet.