Control your drum reflections for stage and studio with thisClearSonic HomePac C Kitfromthat includes four 66″ high S2466x2 Free-Standing SORBER Sound-Absorption Baffles and Gobos bundled with a LidPac 5-3 (3 panels included), two SORBER brackets for support-bar attachment, and an Air King fan.

Note: this kit does not include any acrylic shields.

ClearSonic S2466x2 Free-Standing SORBER Sound-Absorption Baffle and Gobo

The 66″ highClearSonic S2466x2 Free-Standing SORBER Sound-Absorption Baffle and Gobosystem is a 1.6″ thick, 4′ wide SORBER that functions both as an absorber and redirector of acoustic energy.

The S2466x2 features two, 2′ wide hinged panels that fold in half and a handle for easy transport. Two or three S2466x2 can be placed behind a drum kit, or a single S2466x2 can be placed behind an instrument amplifier to absorb the significant amount of acoustic energy that would normally be reflected off of a back wall and back into the room.

Additionally, the S2466x2 can be used while freely standing in a room corner to create a quick and effective bass trap.

The S2466x2 is constructed of lightweight, rigid fiberglass panels and sound-absorbing fabric.

Key Features

• Rear sound damper for use with drum shields and isolation booths
• Great as a gobo for studio, stage, and house of worship
• Two-section ClearSonic SORBER sound-absorption baffle, each panel measures 24″ W x 66″ H
• Connect to other units to create larger gobo walls
• Free-standing design
• Folds flat for storage/transport and moves easily with built-in strap handle
• 1.00 overall NRC rating

SORBER Features

• Proprietary 1.6″ thick, rigid fiberglass core provides superior sound absorption compared to acoustic foam and other fiberglass baffles.
• Hook-and-loop fastener-receptive acoustic fabric jacket provides another layer of sound absorption and allows SORBER baffles to attach to acrylic material or other SORBER baffles with hook-and-loop fasteners.
• Sewn seams: fabric jacket fully covers inner fiberglass. No glue is used and there is no exposed fiberglass.

ClearSonic LidPac 5-3 (Dark Gray)

TheLidPac 5-3 (Dark Gray)fromClearsoniccontains 3 panels designed to prevent sound from escaping upwards in rooms with high ceilings. The panels are lightweight, portable and easy to setup and take down. The pack contains the following components:

• 1 STC4 Panel
• 2 STS4 Panels
• 1 Bar

ClearSonic Air King Fan

TheAir King6″ fan easily clips onto aS5-2SORBER panel, enhancing air circulation inside an IsoPac enclosure. The fan has two speeds, adjustable tilt and a 360 degree pivot. The fan can also be easily wall-mounted.

ClearSonic Sorber Bracket for Support Bar Attachment (2-Pack)

This 2-packSorber BracketfromClearSonicis designed as a support bar attachment for the LidPac. The two included Sorber Brackets each have 1/4″ hole for attachment.

Specifications

Physical

Packaging Info