The amplifier is similar to the EBS Reidmar 502, which means an analog preamp with powerful filters to shape the sound and a 500 W power module developed by EBS with the possibility to hook up an extra cabinet at 4 or 8 ohms if ever needed. You can also use the high-quality XLR output for a balanced line signal from the amp to the FOH mixer without needing an external line box.

With the innovative porting of the cabinet both on the front and back, the compact cabinet delivers more output and low-end bass than you would imagine judging by the appearance. The double-porting helps distribute the sound evenly for a multi-dimensional sound experience that uses the room itself to support and distribute the sound. Still, the tone is solid, punchy, and tight due to the amp’s use of EBS-developed soft clip technology and the highly efficient Neodymium speakers.

Features

• Super lightweight,
• only 15.4 kg for the 210-model, and 16.5 kg for the 115-model.
• Reidmar amp design.
• EBS Soft Clip design for preserved solid bottom at high volume.
• 4-band EQ with Bright and Notch filters.
• Compressor/limiter.
• High-efficiency and lightweight Neodymium speakers.
• Double-ported cabinet (front and back).
• Superior power-to-weight ratio.
• Available in a 2x 10″ and a 1×15″ speaker configuration, both with a tweeter.
• Speakon output forextra cabinet (4 to 8 ohm).
• Switchable between 120/230V.
• Balanced XLR output with ground lift.
• Headphones output.
• Line Out.
• Effects loop.
• Comes with a dust cover.

Specifications

• Input Impedance:1 Mohms // 100 pF
• Character Filter:
  Low +7 dB @ 40 Hz
  Mid -2dB@ 800Hz
  High +3 dB @ 10 kHz
• Comp/limit:
  Gain 0 dB
  Attenuation max 24 dB
  Compression Ratio max 3:1
  Attack (80%) typ. <10 ms
  Release (80%) typ. 100 ms
• Bass Filter:
  Type 12 dB/oct. Shelving
  Gain Range +/-18dB @ 60Hz
• Middle Filter:
  Type Bandpass Filter
  Frequency Range 100 -6.000 Hz
  Gain Range +/-12-15 dB
• Treble Filter:
  Type Shelving
  Gain Range +/-18dB@6kHz
  Bright: Type Shelving
  Gain Range +15/-0 dB @ 10 kHz
• Balanced XLR output:
  Output Level Nominal -10dBv
  Frequency Response +0/-3 dB 10-20.000 Hz
  XLR Connections 1-GND, 2-Hot, 3-Cold
  Options GND Lift, Pre/Post EQ
• Effect Loop:
  Loop Signal Level nominal -10 dBv
  Gain Unity (1:1)
  Output Impedance 100 ohms
  Input Impedance >50 Kohms // 100 pF
• Line out:
  Output Impedance 100 ohms
  Signal Level nominal 0 dBv
• Phones out:
  Impedance recommended 32 -200 ohms
• Power amp:
  500 W
• External cabinet output:
  The minimum Load Impedance of an external cabinet is 4 ohms
  Connect via Speakon output jack.
• Auxiliary output:
  Power Requirements max 500 W
  Mains Protection: T2.5A Fuse (230V) T5A Fuse (100/120V)
• Cabinet:
  Magni 502 – 210:
  Configuration: 2x 10″ Neodymium Speakers + tweeter
  Frequency Response: 45 – 20k Hz
  Size: (H x W x D) 56 cm / 22″ / 44 cm / 17.3″ / 36.5 cm / 14.4″
  Weight (total): 15.4 kg / 33.95 lbs

  Magni 502 – 115:
  Configuration: 1x 15″ Neodymium Speaker + tweeter
  Frequency Response: 30 – 20k Hz
  Size: (H x W x D) 56 cm / 22″ / 44 cm / 17.3″ / 36.5 cm / 14.4″
  Weight (total): 16.5 kg / 36.37 lbs