TheBSS Audio BLU-50is a 4x4 signal processor with built-in BLU link that provides 48 channels of low-latency, fault-tolerant digital audio. The BLU-50 is configured, controlled, and monitored for HiQnet Audio Architect and is compatible with other members
TheBSS Audio BLU-50is a 4×4 signal processor with built-in BLU link that provides 48 channels of low-latency, fault-tolerant digital audio. The BLU-50 is configured, controlled, and monitored for HiQnet Audio Architect and is compatible with other members of the Soundweb London family.
The 48 channels of BLU link bus represents channels 1-48 of a larger 256 channel BLU link bus when integrated with other BLU link devices such as the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB, and BLU-BOB devices. Up to 60 BLU link compatible devices can share channels on a single bus. As with other Soundweb London devices, 12 Control Inputs, 6 Logic Outputs, and an RS-232 port allow the BLU-50 to be integrated with other compatible devices.
The 1/2 rack processor offers a fixed configuration of four inputs and four outputs, configurable signal processing, logic processing, and BLU link. The device can be powered via POE or from the included 12 VDC power adapter. The analog inputs of the BLU-50 provide software configurable gain in 6 dB increments up to +48 dB per channel. Software selectable phantom power is available per channel. The front panel provides LED indicators for phantom power, signal present, and clip information.
Features
Specifications
| Indicators | Per Input: Signal Present, CLIP, 48V (Input Only) Other: COM, STAT, ERR, PWR |
| Analog Inputs | Analog Inputs: 4 Electronically Balanced on Phoenix Mini Combicon Removable Screw Connectors Mic/Line Inputs: Nominal Gain 0 dB, Electronically Switchable up to +48 dB, in +6 dB Steps Input Impedance: 3.5 Kilohms Maximum Input Level: +20 dBu with 0 dB Input Gain, +8 dBu with 12 dB Gain CMRR: > 45 dB at 1 kHz Input Noise (E.I.N.): < -128 dBu Typical with 150 Ohms source Phantom Power: 48 V Nominal, Selectable per Input |
| Analog Outputs | Analog Outputs: 4 Electronically Balanced on Phoenix Mini Combicon Removable Screw Connectors Maximum Output Level: +20 dBu Frequency Response: 20 Hz to 20 kHz (+0.5 dB / -1 dB) THD: 0.005% Typical at +4 dBu, 1 kHz, 0 dB Input Gain Dynamic Range: 110 dB A-Weighted, > 107 dB Unweighted Crosstalk: < -100 dB Output Impedance: 120 Ohms D/A Latency: 29/Fs (0.60 ms at 48 kHz) |
| Control Ports | Control Ports: 12 Inputs and 6 Outputs Control Input Voltage: 0 to 4.5 V Control Input Impedance: 4.7 Kilohms to +5 V (2-Wire Mode), >1 Megohm (3-Wire Mode) Logic Output Voltage: 0 or +5 V Unloaded Logic Output Impedance: 440 Ohms Logic Output Current: 10 mA Source, 60 mA Sink |
| WatchDog | Watchdog Output: Phoenix/Combicon Connector for Fail-Safe Control Opto Output Current: 14 mAWithstanding Voltage: 80 V Maximum (Off) Series Impedance: 220 Ohms (Isolated) |
| Control | Control Network Connectors: RJ45 Ethernet Connector Maximum Cable Length: 300′ / 100 m on Category 5 Cable between Device and Ethernet Switch |
| BLU Link | Connectors: 2 x RJ45 Ethernet Connectors Maximum Cable Length: 300′ / 100 m on Category 5e Cable between Devices Maximum Number of Nodes: 60 Latency: 11/Fs (0.23 ms at 48 kHz) Pass-Through Latency: 4/Fs (0.08 ms at 48 kHz) |
| Power | Power Requirements: 12 to 48 VDC Power Adapter: 100-240 VAC 50/60 Hz, 12 VDC Output Power Consumption: < 55 VA |
| BTU | <188 BTU/Hr |
| Operating Temperature | 32 to 113F / 0 to 45C |
| Dimensions | 1.6 x 8.6 x 7.8″ / 41.3 x 219.2 x 196.9 mm |
| Weight | 2.8 lb / 1.3 kg |
Packaging Info
| Package Weight | 6.45 lb |
| Box Dimensions (LxWxH) | 12.1 x 11.1 x 7.4″ |
Reviews
There are no reviews yet.