The Quest RM6 is an optional 6-Zones paging microphone with built-in chime for use with PR-130A/BT and PR-240A/BT.

Specifications

• Audio Output-0dB (Balanced)
• Audio Input--36 dB 3 dB (Balanced)
• Frequency Response-80Hz~15kHz (-1 dB)
• S/N Ratio-Better than 90dB
• Total Harmonic Distortion (T.H.D.)-Less than 0.5%
• Serial Interface-RS485 Max 200m (UTP CAT5/6)
• Operating Temperature-0 ~ +40C
• Carton Dimensions (WxHxD) –7.9″ x 2.4″ x 4.7″ (200 x 60 x 120mm)
• Weight (Net) –1.10 lbs. (0.5 kg)

Front Panel Features

• Indicators –Power (Blue), Signal (Green), Clip (Red), Busy (Red).
• MIC Input-XLR input Jack to Connect a condenser microphone.
• ALL-Select and release all zones. Press and hold for locking all zones.
• Z1 to Z6 –Individual Zone Selection-Select and release each zone 1 6. Press and hold for locking the selected zone.
• CHIME-Turn ON and OFF the preannouncement chime.
• TALK-Press and hold to start broadcasting after selecting the zone(s) Release the button to end broadcasting.

Rear Panel Features

• LINK-Terminals to connect to the PR-Series mixer-amplifier with UTP CAT5/6 We recommend a total distance of up to 200m between the microphone and the mixer-amplifier. Up to 4 RM6 can be connected through the LINK port
• CHIME volume-Adjust preannouncement chime volume
• MIC volume –Adjust microphone level