FM+ C with Dante is the first transmitter of its kind to offer an FM broadcast and Wi-Fi audio broadcast from a single input source. Whether using the FM+ C for assistive listening, language interpretation, or audio description, this dual broadcast technol
FM+ C with Dante is the first transmitter of its kind to offer an FM broadcast and Wi-Fi audio broadcast from a single input source. Whether using the FM+ C for assistive listening, language interpretation, or audio description, this dual broadcast technology gives users the option of listening to real-time audio stream on their smartphone or tablet using the free WaveCAST receiver app (iOSandAndroid) or use an available FM receiver from the venue.
The FM+ Chas support for Telnet commands via an Ethernet port enabling AV professionals to control and monitor the FM+ C using third-party room control systems.
Specifications
Dimensions | 8.45 W x 8.25 D x 1.72H (21.5 cm x 21 cm x 4.4 cm) | |||
Weight | Transmitter: 3.2 lbs (1.45 kg) | |||
Color | Black | |||
Rack Mount | Standard 19 Rack, one EIA rack space high, 1/2 space wide 12 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits |
|||
Power Supply | Desktop Style Transformer (TFP 062); Input: 100-240 VAC, 50/60 Hz. IEC Line Cord; Output: 24 VDC, 750 mA, 18W. 2.5mm ID center positive barrel connector | |||
Power ON Indicator | Push On/Push Off latching power button with backlight. Green backlight indicates power ON, backlight off indicates power OFF. | |||
Temperature Range | Operating: +32 F to +122 F (0 C to 50 C); Storage: -4 F to +158 F (-20 C to 70 C) | |||
User Interface | 1. 3.12 High Resolution OLED display with selections via buttons. 2. Hosted Web page. 3. Telnet commands over ethernet (see our WaveCAST and FM+ Programmers Guide for available commands and protocol). | |||
Dante | (1x) RJ-45 jack. Only available on FM T55C D | |||
Ethernet | RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address. RJ-45 jack used for web page and streaming audio out. An external Router/DHCP Server is required to stream audio to receiving devices. | |||
RF Section | ||||
Operating Frequencies | 72.1-75.9 MHz , 17 wideband channels (selectable) | |||
Frequency Accuracy | 2 ppm stability, 0-50 C | |||
Deviation | 75 kHz maximum | |||
Pre-Emphasis | 75 microsec | |||
RFField Strength | Does not exceed 80 mV/m at 3 m | |||
Compatible Antennas | ANT 005, ANT 021, ANT 024, ANT 025, ANT 028, ANT 029, ANT 034
Refer to Williams AVs Antenna Selection Install Guide for FCC-compliant antennas for this product. |
|||
Transmission Range | Up to 1000 ft (304 m) with ANT 005 coaxial antenna mounted on rear chassis F-connector | |||
RF Outputs | (1x) #10-32 stud connector in center of unit (pcb mounted) (1x) F-connector on rear chassis |
|||
RF Transmit (RF) Power Indicator | 1 OLED On Air Indicator with 4 states indicating power level Off, Low, Medium, and Full Power. | |||
RF Time Out (sleep mode) | 30 min. duration, 4 hr. duration, or Always On; selected via web page. When audio drops below -18dB, the selected duration begins, and when it expires the unit stops transmitting and goes into a low-power (sleep) mode. Any button press or resumption of audio above -18dB awakens the unit and it begins transmitting again. | |||
Audio Section | ||||
Audio Inputs | (1x) Combination 3-pin XLR, 1/4 (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power. Optional RJ-45 Dante Input (D models only). | |||
Audio Processor Functions | DSP based; Compression: 1:1, 1.5:1 or 2:1; High-pass and Low-pass Filter Frequency control, Music, Voice, and Hearing Assistance Audio Presets | |||
Frequency Response | 31-16000 Hz, 3 dB (re: 1 kHz) (Music Audio Preset) | |||
Signal-to-Noise Ratio | 64 dB (typical) Transmitted RF @ 1kHz | |||
Total Harmonic Distortion | Less than 0.25% @ 1 kHz (RF output) | |||
Common Mode Rejection | Greater than 57 dB @ 1 kHz, Mic or Line mode | |||
Audio Input Gain Adjust | Adjustable from +24dB to -60 dB, in 1dB steps from front screen or web page | |||
Phantom Power | 14.4 VDC applied through 2.2 kOhms resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on 1/4 TRS jack | |||
Audio Level Display | Front screen bar graph display, each segment representing 3dB. It ranges from -18 (1 segment lit) to +12dB (10 segments lit). Over-range warning is indicated by OLVD and flashing empty bar. | |||
Headphone Output | 1/4 TRS stereo jack, mono signal, 7.8 mW total power with 33 . | |||
Dante Output | (1x) RJ-45 jack | |||
Input Level (Bal or Unbal) (at Audio Input Gain = 0dB) |
|
|||
Microphone |
|
|||
Line |
|
|||
Approvals | FCC, RoHS3, WEEE, Industry Canada | |||
Warranty | 2-year warranty against component failure and manufacturing defects. See the Full Warranty statement on the website for details.* Stresses above these ratings may cause permanent damage or degrade reliability. |
Reviews
There are no reviews yet.