Based on the principles of the dbx Zone Processing products, the SC 64 Digital Matrix Processor is the new flagship product for Digital Matrix Processing. Wizard driven configuration using HiQnet System Architect makes unprecedented DSP power, incredible r
Based on the principles of the dbx Zone Processing products, the SC 64 Digital Matrix Processor is the new flagship product for Digital Matrix Processing. Wizard driven configuration using HiQnet System Architect makes unprecedented DSP power, incredible routing flexibility and a rich palette of processing tools accessible with the minimum of training. The SC 64 represents the professional choice of foundation on which to build even the most demanding integrated system.
The SC 64 has a total analog I/O count of 64, configurable in banks of eight. The chassis supports up to eight analog input and/or analog output cards facilitating nine different fully loaded configurations. Analog input cards accommodate a wide range of sources with mic/line switching and phantom power per input. Two High Speed Option slots provide facility for adding forthcoming high bandwidth audio transport I/O cards. All of these features are housed in a sleek 2U rack chassis.
With dedicated DSP for common processing functions and insert positions for specialized processing, the SC 64 offers many processing functions including Advanced Feedback Suppression (AFS), Ambient Noise Compensation (ANC), priority ducking, parametric equalization (PEQ), delay and dynamics. The SC 64 has a diverse range of control options including HiQnet System Architect custom control panels, Ethernet, serial, contact closure, the popular ZC wall controllers and even automatically scheduled events. With so many methods of control, an SC system can truly be tailored to suit the needs and technical expertise of even the scrutinizing contractor.
Features
Specifications
| Indicators | Per Input: Signal Present, Clip, 48V Phantom Power, SYNC, I/O card type (IN, OUT, D-IN, D-OUT) |
| Other Indicators | LCD Display, Page Button, Select Button and LED indicators for: Global CLIP, Link/Active, RS-232 and Power |
| Audio Card Slots | 8 Card Slots (A, B, C, D, E, F, G, H) |
| High Speed Option Slot | 2 Card Slots |
| Input | (8) per Input Card |
| Input Connectors | Phoenix/Combicon, 3.5mm pitch |
| Input Gain Range | Nominal Gain 0 dB, electronically switchable up to +48 dB, in 6 dB steps |
| Input Type | Electronically balanced, RF filtered |
| Input Impedance | 3.5 k ohm |
| Max Input | +22dBu |
| CMRR | >40 dB typical, >55 dB at 1 kHz |
| Mic Preamp Phantom Power | +48 VDC, selectable per input |
| Output | (8) per Output Card |
| Output Connectors | Phoenix/Combicon, 3.5mm pitch |
| Output Type | Electronically balanced, RF filtered |
| Output Impedance | 44 |
| Max Output | +20 dBu |
| Dynamic Range | 107 dB unweighted, 110 dB A-weighted |
| Internal Processing | 32 bit floating point |
| THD+Noise | 0.0045% typical at 0 dBu, 1 kHz, 0 dB input gain |
| Frequency Response | 20 Hz- 20 kHz, +/-0.50 dB |
| Sample Rate | 48kHz |
| GPIO Ports | 8 Control Inputs and 6 Logic Outputs (Phoenix/Combicon, 3.5mm pitch) |
| Control Input Voltage | 0 to 4.5v |
| Control Input Impedance | 4.7 k ohm to +5V (2-wire mode) |
| Logic Output Voltage | 0 or +5V unloaded |
| Logic Output Impedance | 440 ohm |
| Logic Output Current | 10mA source, 60mA sink |
| Relay Contact Connector | Phoenix/Combicon, 3.5mm pitch |
| Relay Contacts | Common (C), Normally Open (NO), Normally Closed (NC) |
| Relay Contact Rated Load | 0.3A at 125VAC, 1A at 30VDC |
| Watchdog Output | Phoenix/Combicon, 3.5mm pitch for failsafe control Opto-isolated |
| Watchdog Output Current | 14mA maximum |
| Watchdog WIthstanding Voltage | 80V maximum (Off) |
| Watchdog Series Impedance | 220 (isolated) |
| Input Delay Length | per channel: Up to 5120ms of input delay |
| Input EQ | per channel: 4 Band Parametric |
| Input Gate | per channel: Downward Expander |
| Input Signal Processing | Two selectable Input Processing blocks per input |
| Insert Types | Advanced Feedback Suppression, Automatic Gain Control, Compressor, De-Esser, 12-Band Notch EQ, 12-Band Parametric EQ, Sub-Harmonic Synthesizer |
| Ducker | 24 level priority ducker |
| Routing/Mixing | 32×1 mixer on every output zone |
| Output Insert Processing | One selectable Output Processing block per output: Gain, Automatic Gain Control, Ambient Noise Compensation, Auto-Warmth |
| Crossover | configs: 1×1, 1×2, 1×3, 1×4 |
| Crossover Filter Type | Bessel 6, 12, 18 and 24 dB/Octave, Butterworth 6, 12, 18 and 24 dB/Octave, Linkwitz-Riley 12 and 24 dB/Octave |
| Output EQ | 6 Band Parametric per channel |
| Limiter Type | dbx PeakStopPlus |
| Output Delay Length | Up to 5120ms of output delay |
| Controls | Ethernet, RS-232, Optional dbx ZC Wall Panels |
| Power Consumption | 100V to 240VAC 50/60Hz, 120 Watts |
| Dimensions | 3.5″ (2U) x 19″ x 15″ (89mm x 483mm x 381mm) |
| Unit Weight | 18.9 lbs. / 8.57 kgs. (with all audio cards installed) |
Reviews
There are no reviews yet.