TheShure P300 IntelliMix Audio Conferencing Processoris designed to work with the Microflex Wireless (MXW) system to deliver eight channels of acoustic echo cancellation, DSP-processing, and level control for conference rooms and meeting spaces. The proces
TheShure P300 IntelliMix Audio Conferencing Processoris designed to work with the Microflex Wireless (MXW) system to deliver eight channels of acoustic echo cancellation, DSP-processing, and level control for conference rooms and meeting spaces. The processor supports Microflex wireless microphones while also offering versatile input and output connectivity options that allows users to incorporate loudspeakers, computers, mobile devices, and other audio components.
The P300 provides Dante (10 in/8 out), and to connect analog devices, the unit provides two 3-pin block connector inputs and two 3-pin block connector outputs along with a 3.5mm input jack for mobile devices. The USB Type-B port lets you connect computers and other USB devices, while the RJ45 port supplies the unit with power and connects it to other access points in the conference system network.
Clear Audio for Conferences, Panels, and Meetings
Streamline the audio experience for every discussion. Fixed architecture provides simple setup, requiring less DSP programming and commissioning time. Multiple connectivity options allow for seamless integration with Shure conferencing microphones, laptops, and even mobile devices. Easy, rackless mounting enables quick, compact integration behind a display, under a table, or in a credenza.
Clever Operation
Intuitive, programming-free LED mute sync functionality with leading third-party software codecs including Zoom Rooms, Microsoft Teams and Skype for Business.
Scale Up
Easily add a presenter mic or control additional zoned loudspeakers with onboard matrix mixing for sound reinforcement applications
Connect with Confidence
Driverless USB audio connection to PCs for soft codecs. Analog I/O for hard codecs. 3.5 mm connection to mobile phones to bridge a remote caller. Design projects offline with Designer System Configuration Software for simple project management. Seamlessly compatible with Microflex Advance and Microflex Wireless conferencing microphones for a complete Shure ecosystem.
Features
Specifications
| Frequency Response | 20 Hz to 20 kHz (+1, -1.5 dB) |
| Dante Digital Audio | Sampling Rate: 48 kHz Bit Rate: 24 Bit |
| USB Audio | Sampling Rate: 48 kHz Bit Rate: 24 / 16 Bit |
| Latency | Firmware 4.1 and Newer: Dante 1-8 In to Dante Out (AEC enabled): 15.4 ms Dante 1-8 In to Dante Out (AEC disabled): 8.7 ms Dante 9-10 In to Dante Out: 3.4 ms Analog In to Analog Out: 3.8 ms Firmware 3.1 and Older: |
| Acoustic Echo Cancelling | Tail Length: Up to 300 ms |
| Analog Connections | Block Connectors:
Dynamic Range (20 Hz to 20 kHz, A-Weighted, Typical): Analog to Dante: 113 dB, Dante to Analog: 117 dB Equivalent Input Noise (20 Hz to 20 kHz, A-Weighted, Input Terminated with 150 Ohms): Total Harmonic Distortion at 1 kHz, 0 dBV Input, 0 dB Analog Gain: <0.05% Common Mode Rejection Ratio (150-Ohm Balanced Source @ 1 kHz): > 50 dB Input Impedance: 9.6 Kilohms Input Clipping Level: Line +27 dBV, Aux+15 dBV Output Impedance: 80 Ohms Output Clipping Level: Line +20 dBV, Aux +0 dBV, Mic -26 dBV |
| Mobile | Connector: 1/8″ / 3.5 mm
Pin Assignments: Tip: Audio Input (Left),Ring 1: Audio Input (Right), Ring 2: Ground, Sleeve: Audio Output (To Phone) Dynamic Range (20 Hz to 20 kHz, A-Weighted, Typical): Analog to Dante: 99 dB, Dante to Analog: 90 dB Total Harmonic Distortion (at 1 kHz, 0 dBV Input, 0 dB Analog Gain): <0.05% Input Impedance: 3.7 Kilohms Input Clipping Level: +4 dBV Output Impedance: 1.4 Kilohms Output Clipping Level (Output Terminated with 2.2 Kilohms): -20 dBV |
General
| Analog Input | 2 x 3-Pin Block Connector (Active Balanced) 1 x 1/8″ / 3.5mm TRRS Input |
| Control Software | Shure Designer |
| Analog Output | 2 x 3-Pin Block Connector (Impedance Balanced) |
| USB | USB 2.0, Type B Single Port Carries 2 Input and 2 Output Channels (Summed Mono) |
| Network Connection | 1 x RJ45 10 x Dante Inputs 8 x Dante Outputs |
| Networking | Cable Requirements: Cat 5e or Higher (Shielded Cable Recommended) |
| Polarity | Non-Inverting, Any Input to Any Output |
| Power Requirements | 802.3 at Type 2 (PoE Plus), Class 4 |
| Power Consumption | 17.5 W, Maximum |
| Thermal Dissipation | Maximum: 17.5 W (60 BTU/Hr) Typical: 14.6 W (50 BTU/Hr) |
| Operating Temperature Range | 20 to 122 F / -6.7 to 50 C |
| Storage Temperature Range | -20 to 165 F / -29 to 74 C |
| Dimensions | 1.6 x 8.3 x 8.9″ / 4 x 21 x 22.6 cm |
| Weight | 3.8 lb / 1.71 kg |
Packaging Info
| Package Weight | 5.6 lb |
| Box Dimensions (LxWxH) | 12.6 x 11.9 x 3.3″ |
Reviews
There are no reviews yet.